Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
✎✎When Speaker Select is set to External Speaker, you should use these settings.
xx TV Speaker: Off, External Speaker: On
✎✎When Speaker Select is set to TV Speaker, you should use these settings.
xx TV Speaker: On, External Speaker: On
✎✎If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as an A/V Receiver/Home theater.
■■ Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
✎✎ By connecting to 5.1ch speakers in a dolby digital setup, maximize your interactive 3D sound experience.
■■ Audio Delay: Correct
Sound Reset
Reset all sound settings to the factory defaults.
Setup Menu
¦¦ Setting the Time
OO MENUm→ Setup → Time → ENTERE
Time
✎✎The current time will appear every time you press the INFO button.
■■ Clock: Setting the clock is for using various timer features of the TV.
✎✎ If you disconnect the power cord, you have to set the clock again.
Clock Mode: Set up the current time manually or automatically.
✎✎ The antenna must be connected in order to set the time automatically.
✎✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
✎✎ Available only when Clock Mode is set to
Manual.
✎✎ You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control.
DST (Off / On): Switches the DST(Daylight Saving Time) function on or off.
✎✎ This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
✎✎ This function is only available when the Clock
Mode is set to Auto.
¦¦ Using the Sleep Timer
OO MENUm→ Setup → Time → Sleep Timer →
ENTERE |
|
■■ Sleep Timer t: Automatically | SLEEP |
shuts off the TV after a preset period | |
of time. (30, 60, 90, 120, 150 and 180 |
|
minutes). |
|
✎✎ To cancel the Sleep Timer, select |
|
Off. |
|
¦¦ Setting the On/Off Time
OO MENUm→ Setup → Time → Timer 1 →
ENTERE
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.
Timer 1
On Time
▲ |
| 12 |
|
|
| 00 |
|
|
|
| am |
| ||||||||
Inactivate |
|
|
|
|
|
|
|
|
| |||||||||||
▼ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off Time |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inactivate |
| 12 |
|
|
| 00 |
|
|
|
| am |
| ||||||||
Volume |
| Source |
| Antenna | Channel | |||||||||||||||
10 |
|
| TV |
|
| Air |
| 3 |
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Repeat |
| Sun Mon |
| Tue | Wed Thu |
| Fri Sat | |||||||||||||
Once |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| L Move UAdjust |
| E Enter R Return | ||||||||||||||||
03 Basic Features