Regulatory Requirements | Samsung GTW-P50M603 instruction

SPECIFICATION FOR GTW-P50M603 PLASMA DISPLAY

VER1.0

6.5AGC Characteristics

	AGC Figure Of Merit	50dB Min.
	RF signal range in which video at PDP drops 6 dB from output level obtained
	with 100mV input.
6.6	RF AGC Cut In Level	55dB ±2dB
6.7	FM/AM Rejection (100mV at SIF input)	14dB min
6.8	Noise Limits Sensitivity	VHF 45dB max
		UHF 49dB max

7.Reliability Requirement:

The MTBF needs 20000hrs under operation 25±5℃(half luminosity, motion picture)

8.REGULATORY REQUIREMENTS:

8.1Safety Requirement:

a. UL	Safety of information technology equipment including
	electrical business equipment
b. CSA	Safety of information technology equipment including
	electrical business equipment

c.TUV

8.2Emission Requirement:

The unit shall meet the EMI limits in all screen modes. For EMI testing, the unit must be failed with the screen pattern consisting of scrolling capital “H” characters also the brightness contrast will be adjusted to max. Level.

a.FCC class B part 15

8.3Transit test

a. Drop Test

200mm max.

b.Vibration Test

1.	Forward and backward	30 minutes 1000 c.p.m
2.	Right and left	30 minutes 1000 c.p.m
3.	Up and down	30 minutes 1000 c.p.m

8.4Power Management:

Mode	H-sync	V-sync	Video	Power dissipation
Normal	Pulse	Pulse	Active	Normal power
Stand-by	No pulse	No pulse	No video	Less than 10 watts
Power saving	Pulse	No pulse	Blanked	Less than 10 watts
Power saving	No pulse	Pulse	Blanked	Less than 10 watts
	No pulse	Pulse

This Plasma display is Energy star compliant when used with a computer equipped with DPMS.

Note: The power indicator LED color is green in normal state, yellow in stand-by and power saving state.

2-7