Samsung GTW-P50M603 service manual Ttl, RED RED GND Green Green GND SDA Blue Blue GND Sync SCL

SPECIFICATION FOR GTW-P50M603 PLASMA DISPLAY VER1.0

2.3.4 RGB Signal:
a. Type		TTL
b. Polarity		Positive or Negative
c. Amplitude		RGB: 0.7Vp-p
d. Frequency		H: support to 31K~91KHz
		V: support to 50~85Hz
2.3.5 DVI Signal:
a. Type		Digital
b. Polarity		Positive or Negative
c. Frequency		H: support to 31K~68KHz
		V: support to 50~85Hz
d. HDCP Encryption		Enabled
2.3.6 Audio Signal:		Analog 500mV rms /more than 22Kohm
2.3.7 Pin Assignments For D-SUB Connector (In / Loop Out):
Pin	Signal Assignment	Pin	Signal Assignment	Pin	Signal Assignment
1	RED	6	RED GND	11	GND
2	GREEN	7	GREEN GND	12	SDA
3	BLUE	8	BLUE GND	13	H-SYNC
4	GND	9	NC	14	V-SYNC
5	GND	10	GND	15	SCL
2.3.8 Pin Assignments For 24 Pin DVI Connector (Digital Only):
Pin	Signal Assignment	Pin	Signal Assignment	Pin	Signal Assignment
1	TMDS Data 2-	9	TMDS Data 1-	17	TMDS Data 0-
2	TMDS Data 2+	10	TMDS Data 1+	18	TMDS Data 0+
3	TMDS Data 2/4 Shield	11	TMDS Data 1/3 Shield	19	TMDS Data 0/5 Shield
4	TMDS Data 4-	12	TMDS Data 3-	20	TMDS Data 5-
5	TMDS Data 4+	13	TMDS Data 3+	21	TMDS Data 5+
6	DDC Clock	14	+5V Power	22	TMDS Clock Shield
7	DDC Data	15	Ground (For +5V)	23	TMDS Clock +
8	No Connect	16	Hot Plug Detect	24	TMDS Clock -

2-2