Mute, Recall, PIP, SOURCE, SWAP, Position

2.4.Display Performance Requirements:

The data of display performance are measured based on the following conditions unless otherwise specified.

a.Ambient temperature

b.Warm up period

c.Line input voltage:

d.Viewing distance

e.Display mode

f.Brightness condition

2.4.1Maximum Resolution:

2.4.2Horizontal Size (Standard) Vertical Size (Standard)

2.4.3Horizontal Size (Max.) Vertical Size (Max.)

2.4.4Maximum Brightness Level:

a.100% center block white pattern (mosaic)

b.Raster background

25±5 ℃

30 minutes Min.

100 Vac ~ 240 Vac (50 / 60 Hz) Distance from screen is 81 cm

Test with window white pattern mode if not specified. Press recall bottom to set default brightness

Support to 1280 x 1024

1106.5±8 mm (for mode 1～31)

622.1±8 mm (for mode 1～31)

Mode 1~31Öover full-scan

Mode 1~31Ö over full-scan

Timing Mode 1

More than 25FL

(while pressing recall button to set default brightness) Less than 0.4FL

(while pressing recall button to set default brightness)

2.5. Operation:
Main unit button	Main power switch (power ON /OFF)
	Power ON/OFF
	Input Select (TV -> AV1 ->AV2[S] -> COMPONENT 1 ->
	COMPONENT 2-> RGB -> DVI->TV run in cycle)
	Menu key -,+
IR Remote Control	Adjustment -,+
IR Remote Control	Power on/off
	MUTE
	Display
	Input Select (same as Main unit button)
	Volume -,+
	Wide:
	TV/AV1/AV2[S]/COMPONENT 1/2 input:
	PANORAMA/4:3/16:9
	(ZOOM1/ZOOM2/ZOOM3/OFF for 16:9 only)
	Analog RGB input: 4:3/16:9
	Menu -,+
	Adjustment -,+
	RECALL
	PIP, SOURCE, SWAP, POSITION
	USE FOR TV MODE:
	V-CHIP/SET
	FAV.CH, FAV.SET, QV, CCD, MTS, CH LOCK,
	SLEEP TIMER,
	Number Select, CH ▲▼
	DIRECT KEY:
	POWER ON, POWER OFF, RGB, TV, AV1, AV2,
	COMPONENT1/2, DVI

2-4

MUTE