Audio Description
(not available in all locations)
(digital channels only)
This function handles the Audio Stream
for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.
■■ Audio Description (Off / On): Turn the audio description function on or off.
■■ Volume: Adjust the audio description volume.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■■ Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External speaker / TV speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
✎✎When Speaker Select is set to External Speaker, you should use these settings.
xx TV speaker: Off , External speaker: On
✎✎When Speaker Select is set to TV Speaker, you should use these settings.
xx TV speaker: On , External speaker: On
✎✎If there is no video signal, both speakers will be mute.
■■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.
Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
✎✎ By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.
Audio Delay: Correct
■■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio,
✎✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than
RF: Set the output level for signals greater or less than
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
¦¦ Selecting the Sound Mode
When you set to Dual
03 Basic Features
Additional Setting
(digital channels only)
■■ DTV Audio Level (MPEG /
✎✎ According to the type of broadcast signal, MPEG
/
✎✎ To increase or decrease the volume, adjust between the range 0 and
| Audio | Dual | Default | |
| Type | |||
|
|
| ||
A2 | Mono | Mono | Automatic | |
Stereo | Stereo ↔ Mono | change | ||
Stereo | ||||
Dual | Dual I ↔ Dual II | Dual I | ||
| ||||
| Mono | Mono | Automatic | |
NICAM | Stereo | Mono ↔ Stereo | change | |
Stereo | Dual | Mono → Dual I | Dual I | |
| Dual II | |||
|
|
|
✎✎If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the Input source is set to TV.
English 17