Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically. ✎✎Preset: Connecting the mains and antenna.
VHF/UHF Antenna
Cable
or | ANT OUT |
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of
✎✎To return to the previous step, press the red button.
1 | Selecting a language |
2 | Selecting Store Demo |
or Home Use | |
3 | Selecting a country |
4 | Selecting an antenna |
5 | Selecting a channel |
6 | ModeSetting the Clock |
7 | Viewing the HD |
Connection Guide. | |
8 | Enjoy your TV. |
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the desired OSD (On Screen Display) language. Press the ◄ or ► button, then press the ENTEREbutton.
yy Select the Home Use mode. Store Demo Mode is for retail environments.
yy Return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.
Press the ▲ or ▼ button, then press the ENTEREbutton.
Select the appropriate country. If the desired country does not exist on the menu, select Others.
✎✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.
✎✎When you input the PIN number,
Press the ▲ or ▼ button, then press the ENTEREbutton.
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Store (P. 12).
✎✎Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.
The connection method for the best HD screen quality is displayed.
Press the ENTEREbutton.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is
6 English