Basic Features
Channel Menu
¦¦ Retuning channels
Antenna (Air / Cable) t
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Country
The PIN input screen appears. Enter your 4 digit PIN number.
■■ Digital Channel: Change the country for digital channels.
■■ Analogue Channel: Change the country for analogue channels.
Auto Store
Scans for a channel automatically and stores in the TV.
✎✎Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.
■■ Antenna Source (Air / Cable): Select the antenna source to memorise.
■■ Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.
When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV.
✎✎ If you set Quick, you can set up Network, Network ID, Frequency, Modulation, Symbol Rate manually by press the button on the remote control.
Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel. (differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Manual Store
Scans for a channel manually and stores in the TV.
✎✎If a channel is locked using the Child Lock function, the PIN input window appears.
■■ Digital Channel: When scanning has finished, channels are updated in the channel list.
✎✎When selecting Antenna → Air: Channel, Frequency, Bandwidth.
✎✎When selecting Antenna → Cable: Frequency, Modulation, Symbol Rate.
■■ Analogue Channel (Programme, Colour System, Sound System, Channel, Search, Store): If there is abnormal sound or no sound, reselect the sound standard required.
✎✎Channel mode
xx P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
xx C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
¦¦ Editing channels
Channel Manager Option Menu
(in Channel Manager)
1.Select a channel and press the TOOLS button.
2.Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.
■■ Edit Channel Name (analogue channels only): Assign your own channel name.
■■ Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired.
¦¦ Other Features
Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and symbol rate for a cable network search.
■■ Freq.Start / Freq.Stop: Set the start or stop frequency (differs in each country)
■■ Modulation: Displays available modulation values.
■■ Symbol Rate: Displays available symbol rates.
12 English