Samsung PPM42S2 manual Selecting a Menu Language Setting the Multi Control, Numeric buttons

Selecting a Menu Language

Setting the Multi Control

Press the Menu button. Move the joystick up or

1 down to select “SETUP”, then press the joystick to enter.

Move the joystick up or down to select the

2 “Language”.

Multi Control
Digital NR	Off
Auto Power On	Off
Panel Lock	Off
Language	English

Multi Control
Digital NR	Off
Auto Power On	Off
Panel Lock	Off
Language	English

Press the Menu button. Move the joystick up or

1 down to select “SETUP”, then press the joystick to enter.

2 Press the joystick to enter.

Multi Control
Digital NR	Off
Auto Power On	Off
Panel Lock	Off
Language	English

Multi Control
Digital NR	Off
Auto Power On	Off
Panel Lock	Off
Language	English

Move the joystick left or right to select the appropri-

3 ate language: English, Spanish, or French.

4 Press the Menu button to exit.

Enter ID setup number. The ID Setup operates by

3 using only the joystick.

ID Setup	0 1
ID Input	_ _

Move the joystick up or down to select “ID Input”,
4 The ID Input operates by using only the	ID Setup	0 1
numeric buttons.	ID Input		0 -

Enter ID Input and the screen with the set ID number

5 will be switched to the Menu screen.

Note

•To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When entering the ID Input number of PDP1 while the PDP is set in the ID Input mode, only PDP1 is switched to the Menu screen and you can operate the remocon. At this time, PDP2 doesn't operate with the remocon and displays the standby mode of ID Input. (See the figure of step 4.)

62 63