Manuals / Milan Technology / Computer Equipment / Switch

Milan Technology MIL-SM808G manual Aggregator Setting, Actions

Models: MIL-SM808G

1 88

Download 88 pages 21.21 Kb

Page 50

4-4-4-1.Aggregator Setting

4-4-4-1.Aggregator Setting

1.Group: Displays the trunk group ID.

NOTE: Before setting LACP support, you must first set the trunk group using the Port / Trunk Configuration screen.

2.LACP: Press the Space key to enable or disable LACP (Link Aggregation Control Protocol) support. If enabled, the group is an LACP static trunking group. If disabled, the group is a local static trunking group.

3.LACP Work Port Num: The maximum number of ports that can be aggregated at the same time. If the group is an LACP static trunking group, the exceed ports is standby and able to aggregate if the work ports fail. If the group is a local static trunking group, the number must be the same as group ports.

Actions->

<Edit>: Configures all items. When finished, pressing ESC returns to the action menu line.

<Save>: Saves all configured values.

<Quit>: Exits this page and returns to previous menu.

46

Image 50

Milan Technology MIL-SM808G manual Aggregator Setting, Actions

Contents

USER GUIDE 8 Port 100BASE-FX Plus One GBIC Intelligent Fiber SwitchMIL-SM808G Canadian EMI Notice Five-Year Limited WarrantyRegulatory Approval European Notice2. Hardware Description Table of Contents4. Network Configuration 6. Technical Specifications 5. Web-Based Management1. Introduction Figure 1-1. The MIL-SM808G switchFeatures Intelligent Management FeaturesConsole and Telnet Management Package ContentsManagement Methods Web-based ManagementSNMP Network Management Indicators Port Hardware DescriptionFront Panel ConsolePower LNK ACT LED IndicatorsFigure 2-2. LED Indicators Table 2-1. The description of LED IndicatorsAttaching Rubber Feet Desktop InstallationRear Panel Figure 2-3. The Rear Panel of the MIL-SM808G SwitchPower On Network Application Segment ApplicationFigure 4-1. Connecting the switch to a terminal via RS-232 cable Network ConfigurationConnecting a Terminal or PC to the Console Port Figure 4-2. The settings of communication parameters Console - MenuBaud Rate 9600 bps Data Bits Parity none Stop Bits Flow Control None Control Key 4-1 Main MenuProtocol Related Configuration Configures protocol features 4-2. Status and Counters 4-2-1. Port Status Actions4-2-2. Port Counters ActionsHardware Version Displays the switch’s Hardware version 4-2-3. System InformationFirmware Version Displays the switch’s firmware version Kernel version Displays Boot PROM version4-3. Switch Static Configuration 4-3-1. Administration Configuration4-3-1-1. Device Information Actions4-3-1-2. IP Configuration ActionsUse this screen to change the Password. The default password is root 4-3-1-4. Change Password4-3-1-3. Change Username 4-3-2. Port / Trunk Configuration Actions4-3-3. Port Mirroring Configuration Actions4-3-4. VLAN Configuration Port Based VLANs 4-3-4-1. VLAN ConfigureChoose a VLAN IEEE802.1Q VLANsPage 4-3-4-2. Create a VLAN Group Actions4-3-4-3. Edit / Delete a VLAN Group 1. Choose Edit or Delete item4-3-5. Priority Configuration Actions4-3-6.MAC Address Configuration 4-3-6-1.Static MAC Address Delete static MAC address Add static MAC addressEdit static MAC address Delete Filtering MAC address 4-3-6-2.Filtering MAC AddressEdit Filtering MAC address 4-3-7.Misc Configuration 4-3-7-1.Port Security 4-3-7-2.MAC Age Interval Actions4-3-7-3.Broadcast Storm Filtering Actions4-3-7-4.Max Bridge Transmit Delay Bound Actions4-4.Protocol Related Configuration 4-4-1.STP 4-4-1-1.STP Enable 4-4-1-2.System Configuration 4-4-1-3.STP Port Configuration 4-4-2.SNMP 3. System Location Enter the location of the switch 4-4-2-1.System Options1. System Name Enter a name to identify the switch 4-4-2-2.Community Strings Actions4-4-2-3.Trap Managers Actions4-4-3.GVRP Actions4-4-4.LACP 4-4-4-1.Aggregator Setting Actions4-4-4-2.State Activity Actions4-4-4-3.LACP Status Actions4-5.Reboot Switch 4-6.Updating Firmware using the Console Port Page root Web-Based ManagementWeb Management Function root1. Home Page 5-1. Web Management Home Overview5-2. Port status A single port counter screen 5-4. Administrator5-3. Port Statistics 5-4-2. Switch Settings 5-4-2-1.Basic 5-4-1. IP Address5-4-2-2.Advanced 1. Miscellaneous Settings2. Priority Queue Service settings VLAN Operation Mode 3. Protocol Enable SettingEnable Internet Group Multicast Protocol Enables IGMP protocol 4. IGMP Theory of Operation GVRP GARP VLAN Registration Protocol Flow Control none 5-4-3. Console Port InformationBaud rate bits/sec Data Bits Parity Check none Stop Bits 5-4-4. Port Controls 5-4-5. Trunking5-4-5-1. Aggregator Setting 5-4-5-2. Aggregator Information 5-4-5-3. State ActivityDescription 5-4-6. Filter Database 5-4-6-1. IGMP SnoopingMessage Query5-4-6-2. Static MAC Address 2. Click on Filter Database5-4-6-3. Port Security 5-4-6-4. MAC Filtering Support Protocol-based VLAN 5-4-7. VLAN ConfigurationSupport Port-based VLANs IEEE 802.1Q VLAN Port Based VLANs 5-4-7-1. BasicVLAN Configuration Create a VLAN and add tagged member ports to it 1. From the main menu, click Administrator -- VLAN Configuration4. Type a VID between 2 to 4094. The default is 2. Click Add 3. Type a name for the new VLANPort VID PVID Configure port VID settings5-4-7-2. Port VID Ingress Filtering5-4-8. Spanning Tree Priority ParameterDescription ForwardPort ParameterDescription Priority5-4-9. Port Mirroring 5-4-10. SNMP 5-4-11.Security Manager 3. Trap ManagerIn web management select Administrator-TFTP update firmware 5-4-12. TFTP Update Firmware5-4-13. Configuration Backup 5-4-13-1. TFTP Restore Configuration 5-4-15. Reboot 5-4-13-2. TFTP Backup Configuration5-4-14. Reset System Dimensions Technical SpecificationsLED Indicators Weight„ Non-standard cables 7. Troubleshooting„ Faulty or loose cables „ Improper Network Topologies„ Cabling