Manuals / Milan Technology / Computer Equipment / Switch

Milan Technology MIL-SM808G Technical Specifications, Standards, Compliance, Protocol, Distance

Models: MIL-SM808G

1 88

Download 88 pages 21.21 Kb

Page 86

Technical Specifications

6.

Technical Specifications

This section provides the specifications of MIL-SM808G switch product.

Standards	IEEE 802.3u 100BASE- FX Fast Ethernet
Compliance	IEEE 802.3z Gigabit Fiber
Protocol	CSMA/CD
Max Forwarding	14,8800 pps per Fast Ethernet port,
and	148,8000 pps per Gigabit Ethernet port (GBIC)
Max Filtering Rate
LED Indicators	Fiber Port :
	LINK/ACTIVE, Full Duplex/Collision ( 100Mbps
	Fiber port), Link/Active(GBIC port)
	Per Unit: Power
Fiber Link Max.	SC Multi-mode:
Distance	Half-duplex: 412m, Full-duplex: 2Km
	SC / ST Single-mode:
	Half-duplex: 412m, Full-duplex: 15 or 60Km
Dimensions	440mmx 160mmx 44mm (L x W x H)
Weight	2200g ±40 g
Storage Temp.	-40ºC to 70ºC ( -40ºF to 158ºF)
Operational Temp.	0ºC to 45ºC ( 32ºF to 113ºF )
Operational	10% to 90% (Non-condensing)
Humidity
External Power	100-240V AC, 50-60Hz
Power	17 Watts ( Max )
Consumption
EMI	FCC Class A, CE Mark
Safety	UL, cUL

82

Image 86

Milan Technology MIL-SM808G Technical Specifications, Standards, Compliance, Protocol, Max Forwarding, Max Filtering Rate

Contents

USER GUIDE 8 Port 100BASE-FX Plus One GBIC Intelligent Fiber SwitchMIL-SM808G Canadian EMI Notice Five-Year Limited WarrantyRegulatory Approval European Notice2. Hardware Description Table of Contents4. Network Configuration 6. Technical Specifications 5. Web-Based Management1. Introduction Figure 1-1. The MIL-SM808G switchFeatures Intelligent Management FeaturesConsole and Telnet Management Package ContentsManagement Methods Web-based ManagementSNMP Network Management Indicators Port Hardware DescriptionFront Panel ConsolePower LNK ACT LED IndicatorsFigure 2-2. LED Indicators Table 2-1. The description of LED IndicatorsAttaching Rubber Feet Desktop InstallationRear Panel Figure 2-3. The Rear Panel of the MIL-SM808G SwitchPower On Network Application Segment ApplicationFigure 4-1. Connecting the switch to a terminal via RS-232 cable Network ConfigurationConnecting a Terminal or PC to the Console Port Figure 4-2. The settings of communication parameters Console - MenuBaud Rate 9600 bps Data Bits Parity none Stop Bits Flow Control None Control Key 4-1 Main MenuProtocol Related Configuration Configures protocol features 4-2. Status and Counters 4-2-1. Port Status Actions4-2-2. Port Counters ActionsHardware Version Displays the switch’s Hardware version 4-2-3. System InformationFirmware Version Displays the switch’s firmware version Kernel version Displays Boot PROM version4-3. Switch Static Configuration 4-3-1. Administration Configuration4-3-1-1. Device Information Actions4-3-1-2. IP Configuration ActionsUse this screen to change the Password. The default password is root 4-3-1-4. Change Password4-3-1-3. Change Username 4-3-2. Port / Trunk Configuration Actions4-3-3. Port Mirroring Configuration Actions4-3-4. VLAN Configuration Port Based VLANs 4-3-4-1. VLAN ConfigureChoose a VLAN IEEE802.1Q VLANsPage 4-3-4-2. Create a VLAN Group Actions4-3-4-3. Edit / Delete a VLAN Group 1. Choose Edit or Delete item4-3-5. Priority Configuration Actions4-3-6.MAC Address Configuration 4-3-6-1.Static MAC Address Delete static MAC address Add static MAC addressEdit static MAC address Delete Filtering MAC address 4-3-6-2.Filtering MAC AddressEdit Filtering MAC address 4-3-7.Misc Configuration 4-3-7-1.Port Security 4-3-7-2.MAC Age Interval Actions4-3-7-3.Broadcast Storm Filtering Actions4-3-7-4.Max Bridge Transmit Delay Bound Actions4-4.Protocol Related Configuration 4-4-1.STP 4-4-1-1.STP Enable 4-4-1-2.System Configuration 4-4-1-3.STP Port Configuration 4-4-2.SNMP 3. System Location Enter the location of the switch 4-4-2-1.System Options1. System Name Enter a name to identify the switch 4-4-2-2.Community Strings Actions4-4-2-3.Trap Managers Actions4-4-3.GVRP Actions4-4-4.LACP 4-4-4-1.Aggregator Setting Actions4-4-4-2.State Activity Actions4-4-4-3.LACP Status Actions4-5.Reboot Switch 4-6.Updating Firmware using the Console Port Page root Web-Based ManagementWeb Management Function root1. Home Page 5-1. Web Management Home Overview5-2. Port status A single port counter screen 5-4. Administrator5-3. Port Statistics 5-4-2. Switch Settings 5-4-2-1.Basic 5-4-1. IP Address5-4-2-2.Advanced 1. Miscellaneous Settings2. Priority Queue Service settings VLAN Operation Mode 3. Protocol Enable SettingEnable Internet Group Multicast Protocol Enables IGMP protocol 4. IGMP Theory of Operation GVRP GARP VLAN Registration Protocol Flow Control none 5-4-3. Console Port InformationBaud rate bits/sec Data Bits Parity Check none Stop Bits 5-4-4. Port Controls 5-4-5. Trunking5-4-5-1. Aggregator Setting 5-4-5-2. Aggregator Information 5-4-5-3. State ActivityDescription 5-4-6. Filter Database 5-4-6-1. IGMP SnoopingMessage Query5-4-6-2. Static MAC Address 2. Click on Filter Database5-4-6-3. Port Security 5-4-6-4. MAC Filtering Support Protocol-based VLAN 5-4-7. VLAN ConfigurationSupport Port-based VLANs IEEE 802.1Q VLAN Port Based VLANs 5-4-7-1. BasicVLAN Configuration Create a VLAN and add tagged member ports to it 1. From the main menu, click Administrator -- VLAN Configuration4. Type a VID between 2 to 4094. The default is 2. Click Add 3. Type a name for the new VLANPort VID PVID Configure port VID settings5-4-7-2. Port VID Ingress Filtering5-4-8. Spanning Tree Priority ParameterDescription ForwardPort ParameterDescription Priority5-4-9. Port Mirroring 5-4-10. SNMP 5-4-11.Security Manager 3. Trap ManagerIn web management select Administrator-TFTP update firmware 5-4-12. TFTP Update Firmware5-4-13. Configuration Backup 5-4-13-1. TFTP Restore Configuration 5-4-15. Reboot 5-4-13-2. TFTP Backup Configuration5-4-14. Reset System Dimensions Technical SpecificationsLED Indicators Weight„ Non-standard cables 7. Troubleshooting„ Faulty or loose cables „ Improper Network Topologies„ Cabling