Manuals / Milan Technology / Computer Equipment / Switch

Milan Technology MIL-SM808G manual Port / Trunk Configuration, Actions

Models: MIL-SM808G

1 88

Download 88 pages 21.21 Kb

Page 25

4-3-2. Port / Trunk Configuration

4-3-2. Port / Trunk Configuration

This page can change every port status and configure trunk groups. Press TAB key to change the configuration of each item.

1.Enabled: User can disable or enable the port. Port 9 is always enabled.

2.Auto Negotiate: Ports 1 to 8 (100Mbps Fiber) are disabled, Port 9 (GBIC port) is enabled.

3.Speed/Duplex Config: Ports 1 to 8 (100 Mbps Fiber port) can be set for full-duplex or half-duplex mode. Port 9 (GBIC port) is fixed at 1000Mbps full-duplex mode.

4.Flow Control: User can set flow control function to be on or off for ports 1 to 8. Flow control for Port 9 (GBIC port) is fixed at enabled (on).

5.Group: User can set trunk groups for ports 1 to 8. There are four possible trunk groups. Port 9 is not available for trunk groups.

Actions->

<Quit>: Exits the port configuration page and returns to previous menu.

<Edit>: Configures all items. When finished, pressing ESC returns to the action menu line.

<Save>: Saves all configured values.

21

Image 25

Milan Technology MIL-SM808G manual Port / Trunk Configuration, Actions

Contents

MIL-SM808G 8 Port 100BASE-FX Plus One GBIC Intelligent Fiber SwitchUSER GUIDE Regulatory Approval Five-Year Limited WarrantyCanadian EMI Notice European Notice4. Network Configuration Table of Contents2. Hardware Description 5. Web-Based Management 6. Technical SpecificationsFigure 1-1. The MIL-SM808G switch 1. IntroductionIntelligent Management Features FeaturesManagement Methods Package ContentsConsole and Telnet Management Web-based ManagementSNMP Network Management Front Panel Hardware DescriptionIndicators Port ConsoleFigure 2-2. LED Indicators LED IndicatorsPower LNK ACT Table 2-1. The description of LED IndicatorsRear Panel Desktop InstallationAttaching Rubber Feet Figure 2-3. The Rear Panel of the MIL-SM808G SwitchPower On Segment Application Network ApplicationConnecting a Terminal or PC to the Console Port Network ConfigurationFigure 4-1. Connecting the switch to a terminal via RS-232 cable Baud Rate 9600 bps Data Bits Parity none Stop Bits Flow Control None Console - MenuFigure 4-2. The settings of communication parameters Protocol Related Configuration Configures protocol features 4-1 Main MenuControl Key 4-2. Status and Counters Actions 4-2-1. Port StatusActions 4-2-2. Port CountersFirmware Version Displays the switch’s firmware version 4-2-3. System InformationHardware Version Displays the switch’s Hardware version Kernel version Displays Boot PROM version4-3-1. Administration Configuration 4-3. Switch Static ConfigurationActions 4-3-1-1. Device InformationActions 4-3-1-2. IP Configuration4-3-1-3. Change Username 4-3-1-4. Change PasswordUse this screen to change the Password. The default password is root Actions 4-3-2. Port / Trunk ConfigurationActions 4-3-3. Port Mirroring Configuration4-3-4. VLAN Configuration Choose a VLAN 4-3-4-1. VLAN ConfigurePort Based VLANs IEEE802.1Q VLANsPage Actions 4-3-4-2. Create a VLAN Group1. Choose Edit or Delete item 4-3-4-3. Edit / Delete a VLAN GroupActions 4-3-5. Priority Configuration4-3-6.MAC Address Configuration 4-3-6-1.Static MAC Address Edit static MAC address Add static MAC addressDelete static MAC address Edit Filtering MAC address 4-3-6-2.Filtering MAC AddressDelete Filtering MAC address 4-3-7.Misc Configuration 4-3-7-1.Port Security Actions 4-3-7-2.MAC Age IntervalActions 4-3-7-3.Broadcast Storm FilteringActions 4-3-7-4.Max Bridge Transmit Delay Bound4-4.Protocol Related Configuration 4-4-1.STP 4-4-1-1.STP Enable 4-4-1-2.System Configuration 4-4-1-3.STP Port Configuration 4-4-2.SNMP 1. System Name Enter a name to identify the switch 4-4-2-1.System Options3. System Location Enter the location of the switch Actions 4-4-2-2.Community StringsActions 4-4-2-3.Trap ManagersActions 4-4-3.GVRP4-4-4.LACP Actions 4-4-4-1.Aggregator SettingActions 4-4-4-2.State ActivityActions 4-4-4-3.LACP Status4-5.Reboot Switch 4-6.Updating Firmware using the Console Port Page Web Management Function Web-Based Managementroot root5-1. Web Management Home Overview 1. Home Page5-2. Port status 5-3. Port Statistics 5-4. AdministratorA single port counter screen 5-4-1. IP Address 5-4-2. Switch Settings 5-4-2-1.Basic1. Miscellaneous Settings 5-4-2-2.Advanced2. Priority Queue Service settings Enable Internet Group Multicast Protocol Enables IGMP protocol 3. Protocol Enable SettingVLAN Operation Mode 4. IGMP Theory of Operation GVRP GARP VLAN Registration Protocol Baud rate bits/sec Data Bits Parity Check none Stop Bits 5-4-3. Console Port InformationFlow Control none 5-4-5. Trunking 5-4-4. Port Controls5-4-5-1. Aggregator Setting 5-4-5-3. State Activity 5-4-5-2. Aggregator InformationMessage 5-4-6. Filter Database 5-4-6-1. IGMP SnoopingDescription Query2. Click on Filter Database 5-4-6-2. Static MAC Address5-4-6-3. Port Security 5-4-6-4. MAC Filtering Support Port-based VLANs IEEE 802.1Q VLAN 5-4-7. VLAN ConfigurationSupport Protocol-based VLAN VLAN Configuration 5-4-7-1. BasicPort Based VLANs 4. Type a VID between 2 to 4094. The default is 1. From the main menu, click Administrator -- VLAN ConfigurationCreate a VLAN and add tagged member ports to it 2. Click Add 3. Type a name for the new VLAN5-4-7-2. Port VID Configure port VID settingsPort VID PVID Ingress Filtering5-4-8. Spanning Tree Description ParameterPriority ForwardDescription ParameterPort Priority5-4-9. Port Mirroring 5-4-10. SNMP 3. Trap Manager 5-4-11.Security Manager5-4-13. Configuration Backup 5-4-13-1. TFTP Restore Configuration 5-4-12. TFTP Update FirmwareIn web management select Administrator-TFTP update firmware 5-4-14. Reset System 5-4-13-2. TFTP Backup Configuration5-4-15. Reboot LED Indicators Technical SpecificationsDimensions Weight„ Faulty or loose cables 7. Troubleshooting„ Non-standard cables „ Improper Network Topologies„ Cabling