Manuals / Milan Technology / Computer Equipment / Switch

Milan Technology MIL-SM808G manual Add static MAC address, Edit static MAC address

Models: MIL-SM808G

1 88

Download 88 pages 21.21 Kb

Page 34

Add static MAC address

Add static MAC address

1.Press the <Add> key. Then press the <Edit> key on this menu to add a static MAC address.

2.Enter the MAC address to and from which the port should permanently forward traffic, regardless of the device’s network activity.

3.In the Port num field, enter the port number for the device.

4.If tag-based (802.1Q) VLANs are configured, the static addresses are associated with individual VLANs. Enter the VID to associate with the MAC address.

5.Press ESC to go back action menu line, and then select <Save> to save all configured values.

Edit static MAC address

1.Press <Edit> key to modify a static MAC address.

2.Choose the MAC address that you want to modify and then press enter.

3.Press the <Edit> key to modify all the items.

4.Press ESC to go back action menu line, and then select <Save> to save all configured values.

Delete static MAC address

1.Press the <Delete> key to delete a static MAC address.

2.Choose the MAC address that you want to delete and then press enter.

3.After delete static MAC address, you must press <Save> to complete the deletion.

30

Image 34

Milan Technology MIL-SM808G manual Add static MAC address, Edit static MAC address, Delete static MAC address

Contents

MIL-SM808G 8 Port 100BASE-FX Plus One GBIC Intelligent Fiber SwitchUSER GUIDE Canadian EMI Notice Five-Year Limited WarrantyRegulatory Approval European Notice4. Network Configuration Table of Contents2. Hardware Description 6. Technical Specifications 5. Web-Based Management1. Introduction Figure 1-1. The MIL-SM808G switchFeatures Intelligent Management FeaturesConsole and Telnet Management Package ContentsManagement Methods Web-based ManagementSNMP Network Management Indicators Port Hardware DescriptionFront Panel ConsolePower LNK ACT LED IndicatorsFigure 2-2. LED Indicators Table 2-1. The description of LED IndicatorsAttaching Rubber Feet Desktop InstallationRear Panel Figure 2-3. The Rear Panel of the MIL-SM808G SwitchPower On Network Application Segment ApplicationConnecting a Terminal or PC to the Console Port Network ConfigurationFigure 4-1. Connecting the switch to a terminal via RS-232 cable Baud Rate 9600 bps Data Bits Parity none Stop Bits Flow Control None Console - MenuFigure 4-2. The settings of communication parameters Protocol Related Configuration Configures protocol features 4-1 Main MenuControl Key 4-2. Status and Counters 4-2-1. Port Status Actions4-2-2. Port Counters ActionsHardware Version Displays the switch’s Hardware version 4-2-3. System InformationFirmware Version Displays the switch’s firmware version Kernel version Displays Boot PROM version4-3. Switch Static Configuration 4-3-1. Administration Configuration4-3-1-1. Device Information Actions4-3-1-2. IP Configuration Actions4-3-1-3. Change Username 4-3-1-4. Change PasswordUse this screen to change the Password. The default password is root 4-3-2. Port / Trunk Configuration Actions4-3-3. Port Mirroring Configuration Actions4-3-4. VLAN Configuration Port Based VLANs 4-3-4-1. VLAN ConfigureChoose a VLAN IEEE802.1Q VLANsPage 4-3-4-2. Create a VLAN Group Actions4-3-4-3. Edit / Delete a VLAN Group 1. Choose Edit or Delete item4-3-5. Priority Configuration Actions4-3-6.MAC Address Configuration 4-3-6-1.Static MAC Address Edit static MAC address Add static MAC addressDelete static MAC address Edit Filtering MAC address 4-3-6-2.Filtering MAC AddressDelete Filtering MAC address 4-3-7.Misc Configuration 4-3-7-1.Port Security 4-3-7-2.MAC Age Interval Actions4-3-7-3.Broadcast Storm Filtering Actions4-3-7-4.Max Bridge Transmit Delay Bound Actions4-4.Protocol Related Configuration 4-4-1.STP 4-4-1-1.STP Enable 4-4-1-2.System Configuration 4-4-1-3.STP Port Configuration 4-4-2.SNMP 1. System Name Enter a name to identify the switch 4-4-2-1.System Options3. System Location Enter the location of the switch 4-4-2-2.Community Strings Actions4-4-2-3.Trap Managers Actions4-4-3.GVRP Actions4-4-4.LACP 4-4-4-1.Aggregator Setting Actions4-4-4-2.State Activity Actions4-4-4-3.LACP Status Actions4-5.Reboot Switch 4-6.Updating Firmware using the Console Port Page root Web-Based ManagementWeb Management Function root1. Home Page 5-1. Web Management Home Overview5-2. Port status 5-3. Port Statistics 5-4. AdministratorA single port counter screen 5-4-2. Switch Settings 5-4-2-1.Basic 5-4-1. IP Address5-4-2-2.Advanced 1. Miscellaneous Settings2. Priority Queue Service settings Enable Internet Group Multicast Protocol Enables IGMP protocol 3. Protocol Enable SettingVLAN Operation Mode 4. IGMP Theory of Operation GVRP GARP VLAN Registration Protocol Baud rate bits/sec Data Bits Parity Check none Stop Bits 5-4-3. Console Port InformationFlow Control none 5-4-4. Port Controls 5-4-5. Trunking5-4-5-1. Aggregator Setting 5-4-5-2. Aggregator Information 5-4-5-3. State ActivityDescription 5-4-6. Filter Database 5-4-6-1. IGMP SnoopingMessage Query5-4-6-2. Static MAC Address 2. Click on Filter Database5-4-6-3. Port Security 5-4-6-4. MAC Filtering Support Port-based VLANs IEEE 802.1Q VLAN 5-4-7. VLAN ConfigurationSupport Protocol-based VLAN VLAN Configuration 5-4-7-1. BasicPort Based VLANs Create a VLAN and add tagged member ports to it 1. From the main menu, click Administrator -- VLAN Configuration4. Type a VID between 2 to 4094. The default is 2. Click Add 3. Type a name for the new VLANPort VID PVID Configure port VID settings5-4-7-2. Port VID Ingress Filtering5-4-8. Spanning Tree Priority ParameterDescription ForwardPort ParameterDescription Priority5-4-9. Port Mirroring 5-4-10. SNMP 5-4-11.Security Manager 3. Trap Manager5-4-13. Configuration Backup 5-4-13-1. TFTP Restore Configuration 5-4-12. TFTP Update FirmwareIn web management select Administrator-TFTP update firmware 5-4-14. Reset System 5-4-13-2. TFTP Backup Configuration5-4-15. Reboot Dimensions Technical SpecificationsLED Indicators Weight„ Non-standard cables 7. Troubleshooting„ Faulty or loose cables „ Improper Network Topologies„ Cabling