Click Select All or mark ‘v’ in the check box to select the display you want to control.
Power Control can control some functions of the ‘v’ marked display.
ŒPower On/Off
-Turns On/Off the power of the selected display.
-Power On : Turns on each set at one second interval to prevent the power overload that might occur when many sets turn on at the same time.
´Volume Control
- Controls the volume of the selected display.
It receives the volume value of the selected display from the sets and displays it in the slider. (When you release the selection or choose Select All, the value will return to default 10.)
ˇMute On/Off
-Turns On/Off the mute of the selected display.
-When selecting one set at a time, if the relative set is setup on Mute, the Mute will be displayed accordingly. (Default settings will be returned if selection is cancelled or Select All is selected.)
Note: The Volume and Mute functions are available for only the displays are powered ON. Power Control will operate for all Displays.
Figure 4-2 Selection Screen of Power Control
78
Input Source Control
Click Input Source of the main icons and the Input Source control screen appears. 
You may only control Displays for which the Power Status is ‘ON’.
Info Grid shows some basic information necessary to Input Source control.
ŒPower Status
-Shows the power status of the current display. ´ Input Source
-Shows what Input Source is used for the current display.
Figure 5-1 Input Source Screen
79