Samsung PS42P2SB, PS50P2HB manual Fine Tuning Channel Reception

Page 25

Fine Tuning Channel Reception

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.

1Press the MENU button.

Result: The main menu is displayed.

2Move the joystick up or down until the Channel is selected.

Result: The options available in the Channel group are displayed.

3Press the joystick button.

4Move the joystick up or down until the Fine Tune is selected. Press the joystick button.

Result: The options available in the Fine Tune group are displayed with the Fine Tune is selected.

5To obtain a sharp and clear picture and good sound quality, move the joystick left or right until you reach the setting.

6To memorise adjusted picture or sound, select the Store by moving the joystick up or down. Set to OK by moving the joystick left or right.

7To erase adjusted picture or sound, select the Erase by moving the joystick up or down. Set to OK by moving the joystick left or right.

ENG

		Channel
Area	ASIA / W.EUROPE
Auto Store
Manual Store
Channel Sort
Channel Edit
Fine Tune
Move	Enter	Menu

	Fine Tune
Fine Tune		0
Store		?
Erase		?
Move	Adjust	Menu

	Fine Tune
Fine Tune		0
Store		OK
Erase		?
Move	Select	Menu

	Fine Tune
Fine Tune		0
Store		?
Erase		OK
Move	Select	Menu

25

Image 25

Contents Plasma Display with Media Station User Instructions Safety InstructionsChecking Parts Contents Contents Viewing the Plasma Display For further details, refer to Switching On and Off onPlug the mains lead into an appropriate For further details about connection, refer to pages 48~51 Viewing the Media StationPower Remote Control ButtonsInstalling the Display on the Wall Attachment Panel Inserting the Batteries in the Remote ControlDegrees of tilt No tilt Been set to 5 degrees Been set to 15 degrees Been tiltedBolt Insulation rubber Remove four large screws from the rear side of the displaySeparating the Display from the Wall Attachment Panel Connecting Speakers Connecting to an Aerial or Cable Television Network Switching On and Off Button Viewing Function Menu Function Becoming Familiar with the Remote ControlMenu Setting up your Remote Control To start the store, press the joystick button Plug and PlayChoosing Your Language Lock the channels see Storing Channels AutomaticallySorting the Stored Channels Auto PAL Secam NTSC4.43 NTSC3.58 Storing Channels Manually D/K I M Channel mode LNA Editing the ChannelsFine Tuning Channel Reception To adjust the Contrast, Brightness, Sharpness, Colour, or Adjusting the Picture SettingsChanging the Picture Standard Custom Dynamic Standard Movie Custom High Middle LowFreezing the Current Picture Changing the Picture SizeStandard Full Normal Custom Colour l Colour 2 Colour Adjusting the Picture Settings PC or DVI ModePreset to the PC mode by using the Source button Setting the Picture PC ModeChanging the Sound Standard Adjusting the Sound SettingsCustom Standard Music Movie Speech Adjusting the Volume Automatically Selecting the Sound Mode Off Virtual Pro Logic Setting the Dolby SurroundNormal Phantom Wide Virtual OffNormal PhantomAdjusting the Dolby Pro Logic Preferences Volume, Bass, Treble, Balance Adjusting the Headphone PreferencesAdjust the each option Up or down Setting the Current TimeHearing the Melody Sound Move the joystickSwitching On and Off Automatically Press the Sleep button on the remote control Setting the Sleep TimerTV AV 1 AV 2 AV 3 AV 4 AV Viewing the Picture in Picture PIPLarge Small Double 1 Double Listening to the Sound of the Sub Picture Front panel Viewing Pictures From External SourcesContents Teletext FeatureDisplaying the Teletext Information To display Press Selecting Display OptionsSecondary page by entering its number Time/SubcodeSelecting a Teletext Input Connecting to the S-Video Input Connecting to the DVD InputConnecting to the DVI Input Connecting to the Audio OutputPreset Signals Connecting to the PC InputFrequency Horizontal frequency Resolution Source Video1024 x 768 pixels Setting up Your PC Software Windows onlyStandard Dot x Line Vertical Horizontal Input Mode PC/DVIPinSignal Pin ConfigurationsPin Care and Maintenance TroubleshootingAfter Sales Service