Samsung PS42P2SB, PS50P2HB manual Inserting the Batteries in the Remote Control

Page 9

Inserting the Batteries in the Remote Control

ENG

You must insert or replace the batteries in the remote control when you:

◆ Purchase the PDP

◆Find that the remote control is no longer operating correctly

1Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it.

2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities:

◆ - on the battery against - on the remote control ◆ + on the battery against + on the remote control

3 Replace the cover by aligning it with the base of the remote control and pressing it back into place.

➢Do not mix battery types, i.e. alkaline and manganese.

Installing the Display on the Wall Attachment Panel

➢Wall attachment panel is sold separately. Check with your dealer.

InstallationNotes

◆Do not install the PDP on any place other than vertical walls.

◆To protect the performance of the PDP and prevent troubles, avoid the followings:

-Do not install next to smoke and fire detectors.

-Do not install in an area subjected to vibration or high voltage.

-Do not install on the wall.

-Do not install near or around any heating apparatus.

◆Use only recommended parts and components.

continued...

9

Image 9

Contents Plasma Display with Media Station User Instructions Safety InstructionsChecking Parts Contents Contents For further details, refer to Switching On and Off on Viewing the Plasma DisplayPlug the mains lead into an appropriate For further details about connection, refer to pages 48~51 Viewing the Media StationPower Remote Control ButtonsInstalling the Display on the Wall Attachment Panel Inserting the Batteries in the Remote ControlDegrees of tilt No tilt Been set to 5 degrees Been set to 15 degrees Been tiltedBolt Insulation rubber Remove four large screws from the rear side of the displaySeparating the Display from the Wall Attachment Panel Connecting Speakers Connecting to an Aerial or Cable Television Network Switching On and Off Becoming Familiar with the Remote Control Button Viewing Function Menu FunctionMenu Setting up your Remote Control To start the store, press the joystick button Plug and PlayChoosing Your Language Lock the channels see Storing Channels AutomaticallySorting the Stored Channels Storing Channels Manually Auto PAL Secam NTSC4.43 NTSC3.58D/K I M Channel mode LNA Editing the ChannelsFine Tuning Channel Reception To adjust the Contrast, Brightness, Sharpness, Colour, or Adjusting the Picture SettingsChanging the Picture Standard Custom Dynamic Standard Movie Custom High Middle LowChanging the Picture Size Freezing the Current PictureStandard Full Normal Custom Colour l Colour 2 Colour Adjusting the Picture Settings PC or DVI ModePreset to the PC mode by using the Source button Setting the Picture PC ModeAdjusting the Sound Settings Changing the Sound StandardCustom Standard Music Movie Speech Adjusting the Volume Automatically Selecting the Sound Mode Setting the Dolby Surround Off Virtual Pro LogicNormal Phantom Wide Virtual OffNormal PhantomAdjusting the Dolby Pro Logic Preferences Volume, Bass, Treble, Balance Adjusting the Headphone PreferencesAdjust the each option Up or down Setting the Current TimeHearing the Melody Sound Move the joystickSwitching On and Off Automatically Press the Sleep button on the remote control Setting the Sleep TimerTV AV 1 AV 2 AV 3 AV 4 AV Viewing the Picture in Picture PIPLarge Small Double 1 Double Listening to the Sound of the Sub Picture Front panel Viewing Pictures From External SourcesContents Teletext FeatureDisplaying the Teletext Information To display Press Selecting Display OptionsSecondary page by entering its number Time/SubcodeSelecting a Teletext Input Connecting to the S-Video Input Connecting to the DVD InputConnecting to the DVI Input Connecting to the Audio OutputPreset Signals Connecting to the PC InputFrequency Horizontal frequency Resolution Source Video1024 x 768 pixels Setting up Your PC Software Windows onlyStandard Dot x Line Vertical Horizontal Input Mode PC/DVIPin Configurations PinSignalPin Care and Maintenance TroubleshootingAfter Sales Service