Samsung PS42P2SB, PS50P2HB manual Adjusting the Dolby Pro Logic Preferences

Page 35

Adjusting the Dolby Pro Logic Preferences

The following Dolby Surround settings can be adjusted to suit your personal preferences.

◆Volume of the center and rear speakers

◆Delay time for the rear speakers (between15 and 30 ms)

◆Activation/deactivation of the test tone to simulate the volume on each speaker

1Press the MENU button.

Result: The main menu is displayed.

2Move the joystick up or down until the Sound is selected.

Result: The options available in the Sound group are displayed.

3Press the joystick button.

4Move the joystick up or down until the Dolby Surround is selected. Press the joystick button.

Result: The options available in the Dolby Surround group are displayed with the Mode is selected.

5Select the Pro Logic by moving the joystick left or right.

6Move the joystick up or down to select a option (Center, Rear, Time Delay, Test Tone) to be adjusted. Change a setting by moving the joystick left or right.

ENG

	Dolby Surround
Mode		Pro Logic
Mode		Phantom
Center		1
Rear		1
Time Delay		15ms
Test Tone		Off
Move	Adjust	Menu

35

Image 35

Contents Plasma Display with Media Station User Instructions Safety InstructionsChecking Parts Contents Contents Plug the mains lead into an appropriate For further details, refer to Switching On and Off onViewing the Plasma Display For further details about connection, refer to pages 48~51 Viewing the Media StationPower Remote Control ButtonsInstalling the Display on the Wall Attachment Panel Inserting the Batteries in the Remote ControlDegrees of tilt No tilt Been set to 5 degrees Been set to 15 degrees Been tiltedBolt Insulation rubber Remove four large screws from the rear side of the displaySeparating the Display from the Wall Attachment Panel Connecting Speakers Connecting to an Aerial or Cable Television Network Switching On and Off Menu Becoming Familiar with the Remote ControlButton Viewing Function Menu Function Setting up your Remote Control To start the store, press the joystick button Plug and PlayChoosing Your Language Lock the channels see Storing Channels AutomaticallySorting the Stored Channels D/K I M Storing Channels ManuallyAuto PAL Secam NTSC4.43 NTSC3.58 Channel mode LNA Editing the ChannelsFine Tuning Channel Reception Custom Dynamic Standard Movie Custom High Middle Low Adjusting the Picture SettingsTo adjust the Contrast, Brightness, Sharpness, Colour, or Changing the Picture StandardStandard Full Normal Changing the Picture SizeFreezing the Current Picture Custom Colour l Colour 2 Colour Adjusting the Picture Settings PC or DVI ModePreset to the PC mode by using the Source button Setting the Picture PC ModeCustom Standard Music Movie Speech Adjusting the Sound SettingsChanging the Sound Standard Adjusting the Volume Automatically Selecting the Sound Mode Normal Phantom Wide Setting the Dolby SurroundOff Virtual Pro Logic Phantom OffVirtual NormalAdjusting the Dolby Pro Logic Preferences Volume, Bass, Treble, Balance Adjusting the Headphone PreferencesMove the joystick Setting the Current TimeAdjust the each option Up or down Hearing the Melody SoundSwitching On and Off Automatically Press the Sleep button on the remote control Setting the Sleep TimerTV AV 1 AV 2 AV 3 AV 4 AV Viewing the Picture in Picture PIPLarge Small Double 1 Double Listening to the Sound of the Sub Picture Front panel Viewing Pictures From External SourcesContents Teletext FeatureDisplaying the Teletext Information Time/Subcode Selecting Display OptionsTo display Press Secondary page by entering its numberSelecting a Teletext Input Connecting to the S-Video Input Connecting to the DVD InputConnecting to the DVI Input Connecting to the Audio OutputSource Video Connecting to the PC InputPreset Signals Frequency Horizontal frequency Resolution1024 x 768 pixels Setting up Your PC Software Windows onlyStandard Dot x Line Vertical Horizontal Input Mode PC/DVIPin Pin ConfigurationsPinSignal Care and Maintenance TroubleshootingAfter Sales Service