Samsung PS-37S4A manual Connecting to an Aerial or Cable Television Network, Rear of the PDP

Page 12

Connecting to an Aerial or Cable Television Network

ENG

Rear of the PDP

or

Cable Television

Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆An outdoor aerial

◆A cable television network

◆A satellite network

1In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the PDP.

2If you are using an indoor aerial, you may need to turn it when tuning your PDP until you obtain a picture that is both sharp and clear.

For further details, refer to:

◆“Storing Channels Automatically” on page 18

◆“Storing Channels Manually” on page 19

➢When installing or re-installing your PDP, be sure to use the supplied coaxial antenna cable. If you connect using a different coaxial cable, there is risk of noise or interference to the screen image. (You must not use another general purpose cable.

Use the 3M/5M/7M cable supplied by Samsung.)

Connecting a Satellite Receiver or Decoder

Rear of the PDP

or

Satellite receiver/

Decoder

12

In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of the PDP. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of the PDP.

Using a Coaxial cable

Connect a coaxial cable to the:

◆Receiver (or Decoder) output socket.

◆Television aerial input socket.

➢If you wish to connect both a satellite receiver (or decoder) and a VCR, you should connect the:

◆Receiver (or Decoder) to the VCR

◆VCR to the PDP

Otherwise, connect the receiver (or decoder) directly to the PDP.

Image 12

Contents PDP-TELEVISION User Instructions Sold Separately Video CableScart Cable Contents Symbols ContentsActual configuration on your PDP may be different Your New Plasma Display PanelDepending on your model Rear Panel For further details about connection, refer to pages 55~59Infrared Remote Control Inserting the Batteries in the Remote Control Assembling the Stand-BaseInstalling the Display on the Wall Attachment Panel Wall Mount Bracket Plastic HangerWall Connecting to an Aerial or Cable Television Network Connecting a Satellite Receiver or DecoderUsing a Coaxial cable Rear of the PDPSwitching On and Off Placing in Standby ModeMains lead is attached to the rear of your PDP Front of the PDPBecoming Familiar with the Remote Control Remote control is used mainly toChange channels and adjust the volume Display the on-screen menu systemSetting Up Your Remote Control Plug & Play Feature To start the search, press the Enter buttonIf you want to reset this feature Choosing Your LanguageStoring Channels Automatically SeeStoring ChannelsManually You wish to identifyAuto PAL Secam or Auto NT3.58 NT4.43 PAL60Channel mode Skipping Unwanted Channels Skipping unwanted channelsResult The Edit menu is displayed Sorting the Stored Channels Assigning Names to Channels Using the LNA Low Noise Amplifier Feature Result The options available are listedActivating the Child Lock Activating the child lockDisplaying Information Changing the Picture StandardDynamic Standard Movie Custom High Middle Low Custom Adjusting the Picture Settings Brightness, SharpnessColour Tone Cool2, Cool1, Normal, Warm1, Warm2 Adjusting the Picture Settings PC or DVI Mode Custom PC mode only Colour1 Colour2 Colour3Setting the Picture PC Mode Preset to the PC mode by using the Source buttonSetting the Picture PC Mode Using the Fine Tune Colour System and Sound System settings are correctIf reception is weak, you can fine tune a channel manually Viewing the Channel Scan Picture Freezing the Current PictureResult Main menu is displayed Result You can view every memorized channel in orderPositioning and Sizing the screen using Zoom PC to DVI ModeSelecting the Picture Size Selecting the Film Mode DNIeTM Digital Natural Image engineSetting the Blue Screen Setting the Melody SoundTable of PIP Settings Viewing the Picture In Picture PIPResult The sources are displayed in the following order TV Ext.1 Ext.2 Ext.3 AV1 AV2Easy functions of remote control Ext.2, Ext.3, AV1, AV2, S-Video,Component1Component2, PC, DVI Using the Digital NR Digital Noise Reduction Feature Changing the Sound Standard Standard Music Movie Speech CustomAdjusting the Sound Settings Adjusting the Volume AutomaticallySetting the TruSurround XT Selecting the Internal MuteStereo Selecting the Sound Mode depending on the model Setting the Sleep Timer Setting and Displaying the Current Time Switching the Television On and Off Automatically Absent Power OffViewing an External Signal Source Satellite STB, AV Receiver, DVD Receiver, GameRedirecting an Input to the External Output Teletext Feature ContentsDisplaying the Teletext Information Press the TTX/MIX button againSelecting Display Options To display PressSelecting a Teletext TeleWeb Feature Option Using the TeleWeb Menu after Displaying the TeleWeb Bookmarking the currentEntering the bookmarked URL Opening the HomeEasy Accessing the TeleWeb Service via the Remote Control Button Function TeleWebConnecting to the External Devices Input/Output SpecificationRear of the TV InputConnecting to the S-Video Input Rear of the TVConnecting to the DVI Input Connecting to the PC InputConnecting to the Component Input Connecting and Using the Home Theater System Connecting the Home Theater SystemTo Display the DVD Home Theater Setting up Your PC Software Windows only Bit colourShown at left is a typical screen for Display dialog box Input Mode PC/DVI Video Signal Dot x Line Vertical HorizontalNVidia chipset Pin Configurations Power button Check the picture contrast and brightness settingsCheck the volume Normal picture but no sound Check the volumeProgramming the Remote Control for Other Components 003, 024019, 023 Wamer amexProgramming the Remote Control for Other Components Bell&Howell040, 047, 050, 052, 060, 063, 065, 066, 067 After Sales Service