.~' . '
,;t~~-~, Initial Setup
<( .
When you turn on your 1V for the first time, it immediately starts the Initial Setup. During Initial Setup, connects to your home network, implements Smart Hub agreements, links to the source of your live 1V signal, and sets up control of your
Information You Need
Have the following information on hand before you turn on your 1V for the first time:
Your wireless network'spassword. (Make sure your network is on.) Your Postal or Zip code.
The name and location of your cable or satellite provider (if you use one).
Internet Access
The 1V must be connected to the Internet to use the Smart Features. If you have a wireless network, confirm that your network router is working before you start the initial setup. If you have a wired network, connect the 1V to the network with an Ethernet cable before you begin (CAT 7 cable preferred).
Running Initial Setup
1Plug your 1V into a wall outlet.
~Aim the Remote Control at the 1V.
...
··~.:.-.:····~··.........
. .
....'~~.. . '. ...'.'
.......... ~ ...
3Press the TV button on the Remote Control to turn on the 1V, and then follow the directions on the screen.
To learn more about operating your 1V and its Smart Features, see your lV'suser'smanual or launch the TV'sbuilt in