¦¦ Memorizing channels
OO MENUm→ Channel → ENTERE
Air / Cable (Air / STD / HRC / IRC)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
✎✎STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
Color System
(Auto / PAL-M / PAL-N / NTSC)
Normally the TV can receive image and sound with good quality in Auto mode. This mode detects the color signal sources automatically. If the color implementation is unsatisfactory, select any of
Picture Menu
¦¦ Changing the Preset Picture Mode
OO MENUm→ Picture → Mode → ENTERE
03 Basic Features
Auto Program
The TV will begin memorizing all of the available channels.
✎✎NOTE
xx If the channel is locked, the PIN input screen appears.
xx All available channels are automatically stored in memory. It takes approximately 3 to 10 minutes to memorize channels.
xx If you want to stop Auto Programming, press the ENTEREbutton.
¦¦ Other Features
OO MENUm→ Channel → ENTERE
Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.
xx Select Fine Tune in the Channel menu.
✎✎Fine tuned channels that have been saved are marked with an asterisk “*” on the
✎✎To reset the
Mode t
Select your preferred picture type by | P.MODE |
pressing the P.MODE button. |
■■ Dynamic: Suitable for a bright room.
■■ Standard: Suitable for a normal environment.
■■ Movie: Suitable for watching movies in a dark room.
¦¦ Adjusting picture settings
OO MENUm→ Picture → Backlight → ENTERE
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality control.
✎✎NOTE
xx When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.
xx Settings can be adjusted and stored for each external device connected to the TV.