Setting Up Your System
Automatic Channel Search for a Satellite
You can automatically detect and save all TV, Radio channels of a Satellite as follows:
System Connection
➞
Power On
➞
Main Menu/Installation
➞
Channel search / Auto
➞
Channel List
➞
Favorite Channel List
•Connect STB to all peripheral devices.
•Turn on the power of STB and other devices.
•Enter your PIN Code. (Initial PIN Code is “0000”)
•Select Automatic Search in Search Mode.
•Select the satellite which you want to search by pressing the Red button.
•Press 
, and STB will automatically search all TV/Radio channels from a satellite and save them into Channel List.
•If you select Channel List in Menu Mode, you can see all channels that you saved into channel list.
•Select Menu/Channel Control/Edit Favorite Channel
•Select a channel that you want to add into the favorite channel list.
Manual Channel Search for a Transponder
You can automatically search and save all TV, Radio channels of a transponder as follows.
Main Menu/Installation
➞
Channel Search / Manual
•Enter your PIN Code.
•Select Manual Search in Search Mode.
•Select the satellite which you want to search.
•Select the transponder from transponder list which you want to search.
•If you cannot find it from transponder list, you should insert all the transponder information
(i.e., Frequency, Symbol Rate, Polarity and FEC).
•Press 
button and STB will automatically search for all channels contained in the selected transponder.
10