General Information
2. Channel Search
Search Mode | Auto / Manual / NIT | |
L.O. Freq.(MHz) | You can select the predefined L.O Frequency by pressing | |
| Left/Right keys or manually enter a specific frequency in | |
| MHz unit by pressing numeric buttons. | |
LNB Power | Depending on the user's antenna LNB, you can supply either | |
| LNB power by setting "ON" or not by setting "OFF". | |
22KHz | Depending on the user's antenna switch box or LNB, you can | |
supply either 22KHz by setting "ON" or not by setting "OFF". | ||
OV/12V Antenna | Depending on the user's antenna switch box, you can pick up | |
Switch | either 12V by Setting "ON" or 0V by setting "OFF". | |
Tone Burst | Depending on the user's antenna switch box, you can select | |
| one of "SA", "SB" and "OFF". | |
Scramble | NO/OFF, if it set "ON", all channel can be scan including | |
| scrambled channel. | |
|
|
|
Please contact the installer of your satellite dish if you do not know the correct setting value of each parameter listed in the above table.
3. Rename Satellite 
=Use the Red buttons to select the satellite that you want to change the name of a satellite
from the satellite list and press F1 button.
=Use the 
and 
buttons to key in the new satellite name.
The F1 button: save the new satellite name,
The F2 button: display the other charaster list.
The F3 button: erase the character currently selected.
NOTE : The maximum length of the satellite name is allowed up to 14 characters.
Press F1 in the Channel Search to change the name of satellite.
You can directly input the number by yourself pushing the numeric buttons in the Remote Control Unit.
21