Menu Operation
5. Manual Channel Search
It will be more convenient to use "Manual Channel Search" procedure when you want to search channel for a specified transponder offered from the satellite. As in Automatic Channel Search, Manual Channel Search also searches all channels broadcasted over a specific transponder using its predefined information. You can add a new transponder if you cannot find it on the predefined transponder list.
=Select "Channel Search" in "Installation Menu"and the following screen will be displayed.
=Select the Manual Search Mode from "Search Mode" field using the 
button.
=Press the 
button .
=If you cannot find the desired transponder from the transponder list, you can add it by inputting appropriate parameter values for a new transponder in the corresponding item of numeric number field.
=When you want to change the parameter of an existing transponder, select the parameter
using the volume button(
) and change its value. (Frequency, Symbol Rate, FEC, Polarity)
=Press the 
button to start the manual searching for the selected transponder.
=You can also search a channel of the specified transponder by specifying Video PID,
Audio PID and PCR PID.
=Enter PIDs of Video, Audio and PCR ( the value is decimal )
=Press the 
button.
=Then the result will be save the data.
=Press the 
button to return to the previous menu. Press the 
button to exit this menu and return to the viewing mode.
=Press F1 to delete all TPs one by one except the first TP and the last TP(add TP) of the current satellite.
23