![](/images/new-backgrounds/1278784/27878441x1.webp)
Audio
| Lets you configure the settings of | ||
| the speakers you have connected | ||
| to obtain the best possible surround | ||
| sound. | ||
| Normal Mode: Select if you | ||
|
| have set up your speakers in the | |
|
| recommended speaker layout with | |
Simple |
| the surround speakers next to or | |
| behind the listening positions. | ||
Speaker | : Select if you have | ||
Setup |
| Simple Mode | |
| put your surround speakers in front | ||
|
| of the listening position. Downmixes | |
|
| the front sound to the surround | |
|
| sound speakers. | |
| NOTES | ||
|
| DPLII, SFE, Virtual 7.1 will not | |
|
| operate when the simple mode is | |
|
| on. | |
| Lets you adjust the following | ||
| speaker settings and turn the test | ||
| tone on and off so you can test the | ||
| speakers. | ||
| Level: Lets you adjust the relative | ||
|
| loudness of each speaker from 6db | |
|
| to | |
|
| deep bass, you can increase the | |
Speaker | | loudness of the subwoofer by 6db. | |
Distance: Lets you adjust the | |||
Settings |
| ||
| relative distance of each speaker | ||
|
| from the listening position up to 30 | |
|
| feet. The farther the distance, the | |
|
| louder the speaker will be. | |
| Test Tone: Lets you run the Test | ||
|
| Tone function so you can test your | |
|
| adjustments. Setting Test Tone to | |
|
| On turns the Test Tone on. Setting it | |
|
| to Off turns it off. | |
Equalizer | Lets you configure the Equalizer | ||
settings manually. | |||
| Lets you set the product so that | ||
Smart Volume | the volume remains stable when a | ||
scene change occurs or when you | |||
| change the channel. | ||
Speaker | Lets you select which speakers you | ||
want active, either the TV's speakers | |||
Selection | or the home theater's speakers. |
| Lets you direct the sound from the | |
| TV to the Home Theater speakers. | |
| Requires an HDMI connection and | |
| an Audio Return Channel (ARC) | |
| compatible TV. | |
| • | If Audio Return Channel is set to |
Audio Return |
| on and you are using an HDMI |
| cable to connect the product to | |
Channel |
| the TV, digital optical input will not |
| • | work. |
| If Audio Return Channel is set to | |
|
| auto and you are using an HDMI |
|
| cable to connect the product to |
|
| the TV, ARC or digital optical input |
|
| is selected automatically. |
| Lets you set the Digital Output to | |
| match the capabilities of the AV | |
Digital Output | receiver you’ve connected to the | |
product. For more details, please | ||
| refer to the digital output selection | |
| table. (See page 52) | |
| Lets you apply dynamic range | |
| control to Dolby Digital, Dolby | |
| Digital Plus, and Dolby TrueHD | |
| audio. | |
| Auto: Automatically controls the | |
|
| dynamic range of Dolby TrueHD |
Dynamic |
| audio, based on information in the |
| Dolby TrueHD soundtrack. Also | |
Range |
| turns dynamic range control off for |
Control |
| Dolby Digital and Dolby Digital Plus. |
| Off: Leaves the dynamic range | |
|
| uncompressed, letting you hear the |
|
| original sound. |
| On: Turns dynamic range control on | |
|
| for all three Dolby formats. Quieter |
|
| sounds are made louder and the |
|
| volume of loud sounds is reduced. |
| Lets you select the | |
Downmixing | downmix method that is compatible | |
with your stereo system. You | ||
Mode | can choose to have the product | |
| downmix to normal stereo or in | |
| surround compatible stereo. | |
| When the product is attached to a | |
Audio Sync | digital TV, lets you adjust the audio | |
delay so that the audio syncs with | ||
| the video. You can set the delay | |
| between 0 and 300 milliseconds. |
04 Settings
English 21