Wireless Network
You can setup a wireless network connection in three ways:
-Wireless Automatic
-Wireless Manual
-WPS(PBC)
Before you configure the wireless network connection, disconnect any wireless network device currently connected to the product or, if applicable, the product's current wired connection.
❑Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 24:
1.In the Network Settings screen, change Network type to Wireless. Then, select Connect and press the E button.
The product searches for and then displays a list of the available networks.
Network Settings
Select your network type.
❑Wireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 24:
1. | In the Network Settings screen, change Network | |
| type to Wireless. Then, select Connect and press | |
| the E button. | |
| The product searches for and then displays a list of | |
2. | the available networks. | |
Scroll through the list, select the desired network or | ||
3. | Add Network, and then press the E button. | |
If you selected a network in Step 2, go to Step 6. | ||
4. | If you selected Add Network, go to Step 4. | |
Enter your wireless network or wireless router's | ||
| name. | |
| • | Enter numbers directly using the number buttons |
| • | on your remote control. |
| Enter letters by selecting a letter with the ▲▼◄► | |
| • | buttons, and then pressing the E button. |
| To display capital letters (or redisplay small letters | |
04 Settings
Network type | Wireless |
Wireless Network
KIMING_VTOWER
TIAS
You can connect your TV to the internet. Please select which wireless network to use.
Please select your preference.
if capital letters are displayed), select | , and |
then press the E button. |
|
• To display symbols and punctuation, select | |
123#&, and then press the E button. To | |
redisplay letters, select 123#&, and then press | |
the E button. |
|
WPS(PBC) Refresh
2.Select the desired network, and then press the E button.
3.On the Security screen, enter your network's security code or pass phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.
4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.
NOTES
You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.
When finished, select Done, and then press the E button.
5.On the Security type screen that appears, use the ▲▼buttons to select the network's Security type, and then press the E button. On the next screen, enter your network's security code or pass phrase.
•Enter numbers directly using the number buttons on your remote control.
•Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
When finished, select Done, and then press the E button. The product searches for the network.
6.The Network connection fail screen appears. Use ◄► buttons to select IP Settings, and then press the E button.
7.Select the IP Setting field, and then set it to Enter manually.
8.Select a network value to enter (IP Address, for example), and then press E button. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the E button.
English 25