Samsung HT-F6500W, HTF6500WZA user manual TV Sound, Sound Setting

Media Play

•Football : Creates a more dynamic, realistic, stadium like sound. For listening to football, soccer, and other sporting events.

•Virtual 7.1 : Creates a virtual 7.1 CH sound using the 5.1 CH speaker system.

•Off : Select for normal listening.

❑Dolby Pro Logic II

Movie  Music  Game  Matrix  Pro Logic  Off

•Movie : Adds realism to a movie soundtrack.

•Music : When listening to music, you can experience sound effects as if you are listening to the actual performance.

•Game : Enhances the excitement of a game’s sound.

•Matrix : Select to hear multi channel surround sound.

•Pro Logic : Select to listen to a 2CH sound source in 5.1CH surround sound with all speakers active.

-A specific speaker(s) may not output depending on the input signal.

•Off : Select for normal listening.

❑SFE Mode

Symphony Hall in Boston (Hall 1)  Philharmonic Hall in Bratislava (Hall 2)  Jazz Club in Seoul B

Church in Seoul  Amphitheater (Rock)  Off

• Symphony Hall in Boston (Hall 1) : Provides a clear vocal as if listening in a concert hall.

• Philharmonic Hall in Bratislava (Hall 2) : Also provides a clear vocal as if listening in a concert hall but, less powerful than HALL1.

• Jazz Club in Seoul B : Recommended setting for Jazz.

• Church in Seoul : Gives the feel of being in a grand church.

• Amphitheater (Rock) : Recommended setting for Rock.

• Off : Select for normal listening.

3D Sound

You can enjoy more natural and vivid surround sound with enriched tones by adjusting the depth of sound using the level options.

Off  High  Low

NOTES

3D Sound is not available in FM mode.

TV SOUND

TV Sound

If you have a TV that supports Anynet+ (HDMI-CEC), the TV SOUND button lets you direct the TV's audio to the Home Theater Speakers or the TV Speakers.

To use, follow these steps:

1.Connect an HDMI cable to the TV and home theater. (See page 17.)

2.Set Anynet+ (HDMI-CEC) On in the home theater and TV.

3.Press the TV SOUND button on the remote control. TV SOUND ON flashes on the display on the front panel, and then changes to D. IN.

•When TV SOUND is on, TV audio outputs through the Home Theater speakers.

4.Press the TV SOUND button again to turn TV SOUND off.

•When TV SOUND is off, TV audio outputs through the speakers of the connected Anynet+ TV.

❑Use TV SOUND:

1)When you want to listen to the TV's audio through the home theater speakers.

2)When you want to listen to the audio from a USB device plugged into the TV through the home theater speakers.

❑TV SOUND ON/OFF support specification