4. HOW TO USE THE FAX FUNCTION

The standalone fax component of your unit offers a range of sophisticated features that allow you to control image quality, reception mode, broadcasting, polling, and transmission priorities. Functions such as sending documents from memory and substituting reception into memory are greatly enhanced by the large memory capacity.

Sending Documents

Setting the Document

This section describes setting documents in the ADF (Auto Document Feeder) or on the original table.

When Using the ADF:

1 Confirm that there are no documents on the original table, and that copying is not in progress, then gently close the original cover.

2 Adjust the document guides to the width of your document.

3 Place the document face up and push it gently into the document tray. The top edge of the document should enter the fax first.

Original face up

4 There are two ways to send the fax:

To scan the document into memory, then dial and transmit, continue with the “Dialing and Transmitting” section.

To dial and transmit the document directly without first scanning it into memory, press the DOCUMENT key. “DIRECT SEND” will appear in the display. Continue with the “Dialing and Transmitting” section.

HOW TO USE THE FAX FUNCTION

4-1

Page 37
Image 37
Toshiba Copier manual Sending Documents, Setting the Document