Special Functions
To set a timer operation:
Step Press these keys | Comments |
1 FUNCTION
2
“TIMER MODE” will appear in the display.
Select SET. “TIMER COMM. #=1”, “TIMER COMM. #=2” or “TIMER COMM. #=3” will appear in the display.
3or
ENTER
Select “SEND MODE” or “POLLING MODE”.
4 | DEF | ABC | Enter the time of the operation |
|
|
| (2 digits for the hour and 2 |
(example) | digits for the minute). |
| |
|
|
5
ABC
or
ENTER
(example)
Enter the code for the day of the operation. If the operation will be performed within 24 hours, just press the ENTER key.
6 | ENTER | “ENTER NUMBER” will appear |
|
| in the display. |
|
|
|
7 |
| Enter the fax number of the |
|
| other machine using one of the |
| JKL | following methods: |
|
| • Press a Rapid key. |
|
| • Enter a Speed Dial number |
|
| with the number keys. |
| (example) | For a polling operation, go to |
| Step 11. | |
|
| |
|
|
|
8 |
| “SET RESOLUTION & |
| ENTER | CONTRAST THEN ENTER” |
|
| will appear in the display. |
9
RESOLUTIONCONTRAST
(optional)
If this is a transmission operation, adjust the resolution and/or contrast if desired. (Otherwise, skip this step.)
10
ENTER
“LOAD DOCUMENT(S)” will appear in the display. If the document is already loaded, no message will appear in the display.
STOP | STOP |
|
11 | . . . | Press the STOP key a number |
| of times until you exit. | |
|
|
HOW TO USE THE FAX FUNCTION |
