Toshiba Copier manual Sending Documents

Sending Documents

When placing the Original on the Table:

1 Confirm that there are no documents in the ADF, and open the original cover.

2 Place the document face down on the original table. Align the document according to the original scale in the illustration below. (Line up the center of the edge of the document with the () mark.)

Original scale

mark

3 Gently close the original cover.

Note: When using the original table, do not set documents in the ADF.

4 Press the BOOK SEND key to scan the page into memory.

5 Select the document size from those displayed.

You can now make resolution or contrast settings as described in the next section and dial and transmit the fax. (See “Dialing and Transmitting” in this chapter)

6 Press the BOOK SEND key. If you have more than one document to read into memory, place the next page, and press the BOOK SEND key to read each page.

4-2 HOW TO USE THE FAX FUNCTION