Fax Setup
Setting Fine Resolution Priority
For most faxing jobs, you will most likely want to specify the resolution. However, you can also set a default resolution when no setting is made using the RESOLU- TION key. When Fine Resolution Priority is turned on, all faxes will be sent in Fine Mode unless otherwise specified. To turn on this function, follow the procedure below:
Factory setting: 2 (OFF)
Step Press these keys | Comments |
1 | FUNCTION | GHI |
“OPTION SETTING” will appear in the display.
2 | DEF |
|
“FINE PRIORITY” will appear in the display.
3 |
| ABC |
or | Press 1 to turn Fine Resolution | |
| Priority on, or 2 to turn it off. | |
|
|
4 | STOP | STOP |
Press the STOP key twice to exit.
Setting Up the Unit for Use with a PC Modem
The unit is set to automatically begin reception if you pick up from an extension telephone and the unit detects a fax tone. However, if you are using a modem on the same line, you must deactivate this function : otherwise the unit will mistakenly attempt to receive the transmission from your computer. To turn of the Fax Signal Receive function, follow the procedure below.
Note: If you turn off the Fax Signal Receive function, be sure to activate the Remote Reception function. See “Using the Remote Reception Function” on the next page for details on how to do this.
Factory setting: 1 (ON)
Step Press these keys | Comments |
1 | FUNCTION | GHI |
“OPTION SETTING” will appear in the display.
2 | ABC |
“FAX SIGNAL RECEIVE” will appear in the display.
3 | ABC |
| or |
Press 1 to turn Fax Signal Receive on, or 2 to turn it off.
4 | STOP | STOP |
|
Press the STOP key twice to exit.
INITIAL SETTINGS |
