Sending Documents
Dialing and Transmitting
Once you have set the document (either in the automatic document feeder or on the original table), and have selected the desired transmission settings, you are ready to dial the number of the receiving fax machine and transmit the document.You can choose from one of the several ways of dialing that best suit your needs.
Direct Keypad Dialing
If the number of the fax you want to reach is not a Rapid key or Speed Dial number, use Direct Keypad Dialing to manually enter it using the following procedure:
1 Confirm that you have correctly set the document in the automatic document feeder or on the original table. (See “Setting the Document” in this chapter)
2 Enter the number of the fax machine you want to send to by pressing the number keys.
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
3 Check the display. If the number of the receiving machine is shown correctly, press the FAX START key.
•If it is not correct, press the STOP key to backspace and clear one digit at a time, and then enter the correct number.
FAX START
HOW TO USE THE FAX FUNCTION |
