Fax Setup
Setting the Date and Time
The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time by pressing the keys on the operation panel as shown below. To correct a mistake, press the STOP key to move the cursor back to the mistake, and then enter the correct number.
Note: The unit supports millennial dates (those from the year 2000 on). To program such a date, enter the last two digits; for example, the year 2000 is programmed by entering “00”.
Use the following procedure to set the date and time:
Step Press these keys | Comments |
1 | FUNCTION | DEF |
|
“ENTRY MODE” will appear in the display.
2 | ABC |
| “ENTER YEAR” will appear in |
|
| ||
|
|
| the display. |
|
|
|
|
3 | WXYZ | WXYZ | Enter the last two digits of the |
|
|
| year. “ENTER MONTH” will |
|
| (example: 1999) | appear in the display. |
|
|
| |
|
|
|
|
4 |
|
| Enter the month (2 digits: “01” |
|
| PQRS | for January, “02 for February, |
|
|
| “12” for December, etc.). |
|
|
| “ENTER DATE” will appear in |
|
|
| the display. |
|
| (example: July) |
|
|
|
|
|
5 |
| JKL | Enter the day of the month (“01” |
|
| ||
|
|
| to “31”). “PRESS ENTER KEY” |
|
|
| will appear in the display. |
|
| (example: the fifth) |
|
|
|
|
|
6 | ENTER |
| “ENTER TIME” will appear in |
|
|
| the display. |
7 | DEF |
|
Enter the hour (2 digits: “00” to “23”).
8 | ABC | Enter the minute (2 digits: “00” |
| to “59”). | |
|
| |
|
|
|
9 | ENTER | The clock starts when you |
| press this button. “STORED” | |
|
|
will appear in the display.
10 | STOP | STOP |
Press the STOP key twice to exit.
INITIAL SETTINGS |
