
Fax Setup
Setting the Number of Rings for Auto Reception
You can set the number of rings before the unit answers in AUTO mode using the procedure below.
Factory setting: 2
Step Press these keys | Comments |
1 | FUNCTION | GHI |
|
|
“OPTION SETTING” will appear in the display.
2 | GHI |
“# OF RINGS(AUTO)” will appear in the display.
3 | WXYZ | Select the number of rings you |
| ||
to |
| would like to use (0 to 9). |
|
|
|
4 |
| “STORED” will appear in the |
ENTER |
| display. |
|
|
5 | STOP | STOP |
Press the STOP key twice to exit.
Note: If the external telephone is connected, the external telephone rings once regardless the number of rings is set to 0.
Setting the Number of Rings for Manual Reception
The number of rings before the unit answers in MANUAL mode can also be set. If you do not want the unit to answer at all in MANUAL Mode, select “0” in Step 3 below.
Factory setting: 0 (OFF)
Step Press these keys | Comments |
1 | FUNCTION | GHI |
|
|
“OPTION SETTING” will appear in the display.
2 | JKL |
“# OF RINGS(MAN.)” will appear in the display.
3 | to | WXYZ | Select the number of rings you |
| |||
|
| would like to use (0 to 9). | |
|
|
|
|
4 |
|
| “STORED” will appear in the |
| ENTER |
| display. |
5 | STOP | STOP |
|
Press the STOP key twice to exit.
INITIAL SETTINGS |