Universal Remote Control RF30 manual Hiding & Adding Pages, Hiding and Adding Pages

Page 18

33

Hiding & Adding Pages

Hiding and Adding Pages

Each of your RF30 Components actually contains five pages. However, only four pages are visible in the factory default setting. One page is hidden in each Component. If you wish to use the hidden page, you can ADD it. If you don’t want to use some of the existing pages, you can HIDE them. You can add or hide pages on Components OR on your favorite channel pages using this simple process:

NOTE: Be sure to program your Macros before you hide pages with potential macros in them. You can’t access hidden pages during macro setup. However, after you finish Macro setup, you can hide pages without affecting operation of your macros.

STEP 4:

“PAGE” appears at the top of the screen. Now, you can navigate to any page, using the MAIN, COMPONENT, FAV, and PAGE buttons.

STEP 5:

When you select a page, the top of the screen indicates whether you want to “ADD?” or “HIDE” the page displayed. When you want to change a page’s visibility (i.e., either ADD or HIDE), simply press the LIGHT button.

STEP 6:

You can continue to ADD or HIDE pages on other devices by repeating Steps 4 and 5.

STEP 7:

When you are finished adding and hiding pages, press the MAIN button four times to return to normal operation.

34

Hiding & Adding Pages

STEP 1:

Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately 3 sec- onds, until the word ”SETUP” is displayed at the top of the LCD touch screen. This signals that you are now in setup mode.

IMPORTANT:You now have 30 seconds to perform the next step while you are in SETUP mode. If you don’t press a button within 30 seconds, SETUP will disappear from the screen, signaling that you have exited setup mode and you will need to start over.

STEP 2:

Press the EDIT button on the LCD screen.

STEP 3:

Press the PAGE button once the screen changes to EDIT mode.

PAGE

BUTTONS

COMPONENT

BUTTON

FAV

BUTTON

Pages CUSTOMIZING

 

 

 

EDIT

 

 

 

PAGE

 

 

 

 

 

 

BUTTON

 

 

 

BUTTON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN

BUTTON

This page is hidden.To ADD it, press the LIGHT button

This page is visible.To HIDE it, press the LIGHT button.

CUSTOMIZING

Image 18
Contents Page Welcome ContnetsCongratulations Getting Started Battery InstallationLocation of Controls Getting Started-OverviewLight Button Basic Setup Overview Pre-Programmed Code MethodBasic Setup From TablePre-Programmed Code Method Pre-Programmed Code Method Setup BasicLearning Method Try 1, 2 and so on, up to Customizing Transmitting Busy Signal IconCustomizing Your RF30 with Special Advanced Features Customizing the LCD Touch ScreenCustomizing the LCD Touch Screen Favorite Channel Setup MacroPowerTM Setup MacroPower Setup Setting UP a Power OFF Macro Advanced Macro OptionsAdjusting Contrast Setting Backlight OptionsAdjusting Length of Backlight Time Turning OFF BacklightingHiding & Adding Pages Hiding and Adding PagesRecalling Pre-Programmed Setup Code Numbers Cloning Other RF30sErasing Commands Overview You can erase an individual button with a learnedRe-setting RF30 to Original Factory Default SettingsPower Blaster Pre-Programmed Code Notes Pre-Programmed Code TablesCode Tables BrandCable / Webtv DVD VCR Audio Audio SAT/DVR LDP AUX AUX Specifications Frequently Asked QuestionsWarranty Other InfoMamaroneck Avenue Harrison, NY Phone FAX