Re-setting RF30 to Original

MacrosButtons,Learnedor ChannelsFavorite

Re-settingRF30toOriginal FactoryDefaultSettings

Factory Default Settings

If you want to start with a clean slate, you can re-set the

RF30 its original factory default settings by performing the

following steps.

NOTE: This process will essentially erase EVERYTHING you

have programmed into the RF30.

Erasing

STEP 4:

STEP 5:

STEP 1:

STEP 2:

If you press ALL, the RF30

To return to normal operating

press and hold both the MAIN

After 10 seconds, the RESET

displays a “SURE?” button.

mode, press the MAIN button

and the STOP buttons for 10

screen appears. Press the ALL

After the SURE button is pressed,

four times

seconds.

button. The RF30 will display a

all the buttons will be erased.

“SURE?” button. Press the

SURE button to erase all of your

If you press DEVICE, a list of

settings and return to the factory

COMMANDSERASING

Components will appear. Press

default setup.

ERASINGCOMMANDS

the Component button that you

MAIN

wish to erase. The bottom of the

BUTTON

screen will flash ERASE twice,

STOP

SURE

then ERASED.

BUTTON

If you press KEY, you’ll have to

navigate to the Component and

Page you want using the MAIN,

COMPONENT and PAGE buttons.

Press a button to erase it. The

bottom of the display will flash

ERASE twice, then ERASED.

SURE

BUTTON