Toshiba 51H93 owner manual Connecting two VCRs, Connecting a VCR to the REC OUT jacks, To view VCR

Chapter 2: Connecting your TV

Connecting two VCRs

You will need:

￿ two coaxial cables

￿ two sets of standard A/V cables

• For better picture performance, if VCR 1 has S-video, use an

S-video cable (plus the audio cables) instead of the standard video

cable. However, do not connect both types of video cable to

VIDEO 1 (or VIDEO 2) at the same time or the picture

performance will be unacceptable.

• If VCR 1 has mono audio, connect L/MONO on the TV (VIDEO 1)

to the audio out jack on VCR 1 using the white audio cable only.

• Do not connect the same VCR to the output and input jacks on the

TV at the same time.

From antenna or Cable

Connect the IR blaster cable to the G-LINK jack

VCR1 (plays)

		VIDEO	AUDIO
IN from ANT	CH 3	L	R	IN
	CH 4
OUT to TV		L	R	OUT

TV

ANT( 75	)
		G-LINK	DVI/HDCP IN	TheaterNet
				IEEE1394
				1
ANT-1	ANT-2
				IEEE1394
	REC OUT			2
VIDEO	L	R		DIGITAL
	AUDIO			AUDIO OUT

IN

￿ To view the antenna or Cable signal:

Turn OFF the VCR. Select the ANT-1 video input source.*

• If you have both an off-air antenna and Cable TV, connect the

antenna to ANT-2 and the Cable TV to ANT-1 (ANT-1 and

VIDEO 1 are the only sources for the TV Guide On Screen

program guide).

(see page 25)

VIDEO 1 VIDEO 2

S-VIDEO

L/

AUDIO

COLOR		COLOR
STREAM		STREAM
HD-1		HD-2
Y		Y		AUDIO
			R	L
PB		PB
			OUT	AUDIO CENTER
PR		PR	VIDEO		a	IN
			L/
L		L	MONO			TheaterNet
AUDIO	AUDIO		AUDIO	VAR	ONbOFF
				AUDIO
R		R	R			IR OUT

￿ To view VCR 1:

Select the VIDEO 1 video input source.*

￿ To dub or edit from VCR 1 to VCR 2:

VCR 2 must select “line IN.”

Select the VIDEO 1 video input source.*

Note: If you have a Cable box, connect the Cable box and splitter to VCR1 as shown on page 13.

VCR2 (records)

		VIDEO
IN from ANT	CH 3	L	R	IN
	CH 4
OUT to TV		L	R	OUT
		L		R

aThe Video OUT jack does not output the POP picture.

bThe AUDIO OUT jacks can output the sound of either the Main or POP picture (see “Selecting the AUDIO OUT sound” on page 79).

Connecting a VCR to the REC OUT jacks

If you connect an ATSC antenna or digital Cable service to ANT 1 or		From	TV
	ATSC antenna
ANT 2, or a digital device to one of the IEEE-1394 ports, you can use			ANT( 75 )			G-LINK		DVI/HDCP IN		IEEE1394
	or digital Cable
the REC OUT jacks to record down-converted programs to an analog										TheaterNet
			ANT-1	ANT-2						1
VCR.										IEEE1394
			REC OUT							2
Note:			VIDEO	L R					DIGITAL
									AUDIO OUT
• The REC OUT jacks only output down-converted signals from an ATSC,					HD-1	HD-2
			VIDEO 1	VIDEO 2		COLOR
digital Cable, or IEEE-1394 source in an analog signal format.					STREAM	STREAM
				Y		Y	R	L
			S-VIDEO
• For the best possible audio/video performance, when using an ATSC, digital				PB		PB
			VIDEO				OUT	AUDIO CENTER
Cable, or IEEE-1394 source, it is recommended that you use the REC OUT				PR		PR	VIDEO	CHANNEL IN
			MONO				MONO
			L/				L/		TheaterNet
jacks (instead of A/V OUT or VAR AUDIO OUT) to connect to an external			AUDIO	L		L	AUDIO	L
				AUDIO AUDIO				AUDIO ON OFF
								VAR
A/V system.			R	R		R	R	R		IR OUT
• This connection cannot be used for timed recordings.			VCR
• Because of copy protection requirements, the REC OUT jacks may be blocked
								VIDEO
during playback of some IEEE-1394 content.
			IN from ANT		CH 3			L	R	IN
• See “Using the digital tuner hold” on page 61.					CH 4
			OUT to TV					L		OUT
You will need:									R
								L		R
￿ one set of standard A/V cables		The unauthorized recording, use, distribution, or revision of television
￿ one coaxial cable
		programs, videotapes, DVDs, and other materials is prohibited under the
_____________		Copyright Laws of the United States and other countries, and may subject
* To select the video input source, press INPUT on the remote control (see page 61).
		you to civil and criminal liability.
To program the TV remote control to operate other devices, see pages 30 to 33.

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 17