Toshiba 51H93 owner manual TheaterNet on-screen device control, To connect the IR blaster cable

Chapter 2: Connecting your TV

Controlling infrared remote-controlled devices through the TV (IR pass-through)

You can use the TV’s IR OUT jack (infrared pass-through) to remotely operate (through the TV) many infrared remote-controlled devices (such as a Toshiba infrared remote-controlled VCR or DVD player or an IEEE-1394 device) enclosed within an entertainment center or similar cabinet. Without the IR OUT connection, the device typically would need to be visible to operate it remotely.

You will need:

￿one dual-wand IR blaster cable (included with your TV)

￿other audio/video cables as required to connect the device(s) to the TV (see pages 12–20)

To connect the IR blaster cable:

1.Locate the infrared sensor on the front of your device. This sensor is marked on some devices.*

3.Align one of the IR blaster cable’s wands about 1 inch away from the infrared sensor on the front of the device and attach it using the enclosed mounting tape. If you have a second device, attach the second wand in a similar manner. (See illustration at right.)

Note: If you do not have a second device, coil the second wand with a rubber band and leave it behind the TV.

4. Plug the IR blaster cable’s plug into the TV’s IR OUT jack.

Front of IR-controlled DVD player (for example)

Front of IR-controlled audio device (for example)

Infrared sensor

IR blaster cable wand (approx. 1 inch from device)

Back of TV

ANT( 75	)	G-LINK
			DVI/HDCP IN	TheaterNet
				IEEE1394
				1
ANT-1	ANT-2
				IEEE1394
	REC OUT			2
VIDEO	L	R		DIGITAL
	AUDIO			AUDIO OUT

IN

VIDEO 1 VIDEO 2

COLOR	COLOR
STREAM	STREAM

To control the device(s):

Point the TV remote control (programmed to operate the device; see pages 47–49) or the device’s remote control at the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR blaster cable.

Note:

S-VIDEO

VIDEO

L/

MONO

AUDIO

R

HD-1 HD-2

Y	Y		AUDIO
		R	L
PB	PB
		OUT	AUDIO CENTER
PR	PR	VIDEO	CHANNEL IN
		L/
L	L	MONO	L	TheaterNet
AUDIO	AUDIO	AUDIO	VAR
			AUDIO	ON OFF
R	R	R	R	IR OUT

•If you use the device’s remote control to operate the device, you also will need to use the TV’s remote control to operate the TV.

•For additional control options, see “TheaterNet on-screen device control” at right.

1	2	3
4	5	6
7	8	9
	0

TheaterNet™ on-screen device control

For additional control options
for your home theater system,
set up the TheaterNet on-screen
device control feature. You can	DVD	Video 1
use this feature to control many
IR remote-controlled devices		IR Home-TheaterLink

*If you cannot locate the device’s infrared sensor: 1. Turn OFF the device.

2.Starting at the lower left corner of the device, place the end of the device’s remote control (with the infrared emitter) so it touches the front of the device and press POWER. (Do not use the TV’s remote control for this step.)

3.If the device turns on, the place the remote control touched the device is the location of the sensor.

4.If the device does not turn on, move the remote control slightly to the right and press POWER again.

5.Repeat step 4 until you locate the device’s infrared sensor.

(and IEEE-1394 devices) using
the on-screen control icons.
See pages 45–49 for details on
setting up and using TheaterNet.
See pages 22–23 for details on
connecting IEEE-1394 devices.	1	2	3
	4	5	6
	7	8	9
Note: The TheaterNet icon controls are the		0
only device functions available when the icons
are on-screen. To access other device
functions, close the TheaterNet icon window.

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 21