Toshiba 62HM196 manual Using the POP features, Using the POP double-window feature

HM196_EN.book Page 40 Tuesday, May 30, 2006 2:18 PM

Chapter 5: Using the TV’s features

Using the POP features

Using the POP double-window feature

The POP (picture-out-picture) double-window feature splits the screen into two windows so you can watch two programs at the same time.

To display a program in the POP window:

1 Press Pto open the POP double-window.

POP double-window

ANT1	POP
12	ColorStream HD1

Left window Right window

Green border (denotes active window)

2 Press C or c to highlight the desired window. When highlighted, the window will have a green border.

3 Press +to open the Input Selection window. Select the input source for the POP window by pressing the corresponding Number button (0–7). The current source displays in red.

•If you labeled all of the inputs as HIDE (- page 32), the POP feature will be disabled and the message “Not Available” will appear on-screen if you try to open the POP double-window.

•When the Input Lock feature is in Video or Video+ mode, If you try to open the POP double-window, the message “Not Available” will appear.

To tune to the highlighted window (and close the POP double-window):

Press Tafter highlighting the window you want to view as a normal picture.

To close the POP double-window:

Press Tor O.

At this time, the active window will remain as a normal picture on the screen.

Notes about recording:

•If the POP window is open and you attempt to start recording, the POP window will close before recording starts.

•If you use the TV’s remote control to start recording, you will not be able to open the POP window and the message “Not Available” will appear if you try to do so.

•It is recommended that you use the TV’s remote control to start recording. If you use a device other than the TV’s remote control to start recording, you may accidentally open the POP window during the recording process. If this happens, the recorded audio will reflect the audio of the active window (left or right), which may not be the audio you intended to record.

Left window

Input Selection ANT 1

0 ANT 1

1Video 1

2Video 2

3ColorStream HD1

4ColorStream HD2

5HDMI 1

6HDMI 2

7ANT 2

0 - 7 / INPUT to Select

Right window

Input Selection ColorStream HD1

0ANT 1

1Video 1

2Video 2

3 ColorStream HD1

4ColorStream HD2

5HDMI 1

6HDMI 2

7ANT 2

0 - 7 / INPUT to Select

Left window — ANT 1 and ANT 2 inputs are selectable. Right window — ColorStream HD1/HD2 (only for 480p,1080i and 720p) and HDMI 1/2 are selectable.

Note:

•The error message “Current video format cannot be displayed” will appear if you press Pin the ColorStream HD1/HD2 mode and 480i format.

•The FREEZE feature is not available when the POP double-window is open. If you press Bwhen the POP double-window is open, the message “Not available from current video mode” will appear.

40

HM196 (E/F) Web 213:276