Adjusting the audio, Digital closed captions

HM196_EN.book Page 44 Tuesday, May 30, 2006 2:18 PM

Chapter 5: Using the TV’s features

Digital closed captions

You can use the Digital CC/Audio Selector to select digital closed caption services (if available), which will temporarily override closed captions for digital channels only.

When such services are not available, the Digital CC/Audio Selector presents a default list of services. If the selected service is not available, the next best service will be used instead.

To select digital closed captions:

1 Press Yand open the Applications menu.

2 Highlight Digital CC/Audio Selector and press T.

Applications

Picture Viewer

Audio Player

Channel Browser

TV Guide On Screen

Digital CC/Audio Selector

CableCARD

Navigate ENTER Select CH RTN Back EXIT Exit

3 Press B or b to select Closed Caption, and then press C or c to select the desired service.

Closed Caption

CC 1

AudioNone

4 Press O.

Using the Closed Caption button on the remote control

Pressing ;(Closed Caption) when an analog channel is tuned:

•The CC selector will be active and will display CC1-4 and T1-4 as the options.

•The audio selector will be disabled.

Pressing ;(Closed Caption) when a digital channel is tuned:

•The CC selector will be active and will display the possible caption options (available languages) for that channel or service. For example, a program might have “English,” “Spanish,” and “French” as the caption languages available.

•The audio selector will be active and will give the choices for the audio for the digital channel. This might be Dolby or AC3 or whatever the stream includes.

Adjusting the audio

Muting the sound

Press Wto partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press W, the mute mode will change in the following order:

1/2 Mute Mute Volume

If the closed caption mode is set to Off when you select “MUTE” mode, the closed caption feature is automatically activated. To mute the audio without automatically activating the closed caption feature, use Zto set the volume to 0. See “Using the closed caption mode” (- page 43) for more information on closed caption modes.

Using the digital audio selector

You can use the Digital Audio Selector to conveniently switch between audio tracks on a digital channel (for those channels that have multiple audio tracks). This temporarily overrides the audio track chosen by the language option under Audio Setup (- “Selecting stereo/SAP broadcasts” on page 45).

To use the digital audio selector: