Toshiba 62HM196 manual Selecting the picture mode, Adjusting the picture quality

In the Mode field, select the picture mode you prefer.

HM196_EN.book Page 42 Tuesday, May 30, 2006 2:18 PM

Chapter 5: Using the TV’s features

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different modes, as described below.

Mode	Picture Quality
Sports	Bright and dynamic picture (factory setting)
Standard	Standard picture settings (factory setting)
Movie	Lower contrast for darkened room (factory
	setting)
Preference	Your personal preferences

To select the picture mode:

1 Press Yand open the Video menu.

2 Highlight Picture Settings and press T.

3

Picture Settings		ANT 1
	Mode	Sports

Contrast100

Brightness50

Color50

Tint0

Sharpness50

ResetDone

Picture Settings Mode: Standard

ModeStandard

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note:

•The picture mode you select affects the current input only (ANT 1 in the example above). You can select a different picture mode for each input.

•If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change a picture quality setting (for example, increase the contrast or change the color temperature), the picture mode automatically changes to Preference in the Picture Settings menu.

•If you previously set the TV to High Bright mode, and chose Reset in item 4 above, the TV will default to Low Power mode. To set the TV back to High Bright mode, see page 55.

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color, tint, and sharpness) to your personal preferences.

Selection	Pressing C	Pressing c
contrast	lower	higher
brightness	darker	lighter
color	paler	deeper
tint	reddish	greenish
sharpness	softer	sharper

To adjust the picture quality:

1 Press Yand open the Video menu.

2 Highlight Picture Settings and press T.

3 Press B or b to select the picture quality you want to

adjust (Contrast, Brightness, Color, Tint, or Sharpness), and then press Cand cto adjust the setting, as described in the table above.

Picture Settings		ANT 1
	Mode	Sports

Contrast100

Brightness50

Color50

Tint0

Sharpness50

ResetDone

Picture Settings Mode: Preference

Contrast70

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

The picture qualities you adjusted are automatically saved in the Preference mode (- “Selecting the picture mode,” above left).

42

HM196 (E/F) Web 213:276