Toshiba 72MX196 Using the TV’s advanced features, Using the advanced picture settings features

MX196_EN.book Page 55 Tuesday, June 27, 2006 1:43 PM

Chapter 6: Using the TV’s advanced features

Using the advanced picture settings features

Using dynamic contrast

When dynamic contrast is set to Low, Middle or High, the TV will detect changes in the picture quality that affect the appearance of your contrast settings and then automatically adjust the video.

To select dynamic contrast preferences:

1 Press Yand open the Video menu.

2 Highlight Advanced Picture Settings and press T.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Navigate ENTER Select CH RTN Back EXIT Exit

3 In the Dynamic Contrast field, select either Off, Low, Middle or High.

\

Advanced Picture Settings				ANT 1
	Dynamic Contrast		High
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Lamp Mode		Low Power
	Vertical Edge Enhancer		Middle
	Color Management
	Game Mode		Off
		Reset	Done

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note: If the current picture mode is Movie (in the Picture Settings menu; - page 42), when the dynamic contrast is set to Low, Middle, or High, the picture mode will automatically change to Preference.

Using CableClear® digital noise reduction

The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.

To change the CableClear settings:

1 Press Yand open the Video menu.

2 Highlight Advanced Picture Settings and press T.

3 In the CableClear field, select your desired setting.

Advanced Picture Settings				ANT 1
	Dynamic Contrast		High
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Lamp Mode		Low Power
	Vertical Edge Enhancer		Middle
	Color Management
	Game Mode		Off
		Reset	Done

Note:

•If the current input is ANT 1, ANT 2, VIDEO 1, or VIDEO 2, the menu will display the text “CableClear.” The available selections are Off, Low, Middle, High, and Auto.

•If the current input is ColorStream HD1, ColorStream HD2, or HDMI, the menu will display the text “DNR.” The available selections are Off, Low, Middle, High, and Auto. Auto will react proportionally to the strength of the noise. Low, Middle, and High will reduce the noise in varying degrees, from lowest to highest, respectively.

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

55

MX196 (E/F) Web 213:276

Downloaded from www.Manualslib.com manuals search engine