Toshiba 72MX196 manual Disposing of the used lamp unit

Page 86

MX196_EN.book Page 86 Tuesday, June 27, 2006 1:43 PM

Chapter 9: Appendix

Note:

Never subject the lamp unit to excessive shock.

Never touch the lamp unit glass or otherwise get it dirty. Doing so may affect the image quality and reduce the service life of the lamp. See “Cleaning the lamp unit glass” below.

CLEANING THE LAMP UNIT GLASS

If you accidentally touch the lamp unit glass or otherwise get it dirty, wipe it with a lint-free lens cleaning cloth (such as a cloth for cleaning camera lenses or eyeglasses).

CAUTION: NEVER clean a hot lamp with any type of flammable liquid or aerosol cleaning agent. Many ordinary cleaning agents (such as

glass cleaners) contain chemicals that may be flammable at certain temperatures. If the lamp unit is not allowed to cool for at least one (1) hour, such chemicals may ignite.

7 Using a manual Phillips screwdriver, tighten the two lamp unit screws.

Note: Hand-tighten only. Do not use an electric screwdriver.

Lamp unit screws (use manual Phillips screwdriver only)

NOTE : Make sure the lamp unit and screws are installed securely; otherwise, the TV may not turn on and the lamp life may be shortened.

8 Reattach the lamp unit door, making sure to insert the hooks on the left side of the lamp unit door inside the opening in the TV cabinet.

Insert the hooks inside the

TV cabinet opening.

Lamp unit door

9 Replace the screw and tighten using a manual screwdriver.

 

Hand tighten using

Lamp unit door

a manual screwdriver

NOTE: Make sure the lamp unit door is installed securely; otherwise, the TV may not turn on.

10 Plug in the power cord and turn on the TV. After the initial warmup period (which may take several seconds for full picture brightness), the TV should operate normally. If any of the following conditions exist, turn off the TV, unplug the power cord, and repeat steps 1–9 to ensure that the lamp unit and lamp unit door are installed correctly:

No picture

Dark picture

TV will not turn on

If, after repeating steps 1–9, the problem still exists:

In the U.S., call TACP Consumer Solutions at 1-800-631-3811.

In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click “Home Entertainment,” and then click “Support.”

Disposing of the used lamp unit

Place the used lamp unit in the empty box from the new unit.

Keep the lamp unit out of reach of children and pets.

CAUTION: Always handle the lamp unit with care.

The lamp unit in this TV was designed for safe replacement by consumers; however, if the lamp unit is subjected to intentional or accidental abuse (such as excessive mechanical abuse or handling by children or pets), the unit may break, exposing sharp edges or pinch points.

Dispose of the used lamp unit by the approved method for your area.

NOTE: The lamp unit contains mercury. Disposal of mercury may be regulated due to environmental considerations. For disposal or

recycling information, contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

86

MX196 (E/F) Web 213:276

Downloaded from www.Manualslib.com manuals search engine

Image 86
Contents 62MX196 72MX196 This TV contains several cooling fans to moderate PartTelevision Stand Model 62MX196 72MX196 Voice announce feature Trademark InformationContents Troubleshooting Welcome to Toshiba Features of your new TVIntroduction Read Important notes about your DLP projection TV ColorStream HD-1, ColorStream HD-2, Hdmi 1, Hdmi 2, PC, ANT TV front and side panel controls and connectionsBlue, Yellow and Green/Red LEDs TV back panel connections ColorStream HD-1 in and ColorStream HD-2MX196EN.book Page 10 Tuesday, June 27, 2006 143 PM Remote control effective range Using the remote controlInstalling the remote control batteries To install the remote control batteriesLearning about the remote control On Screen Interactive Program Guide TheaterWide 1/2/3, and FullSatellite DVD Remote Control functional key chartCombo Receiver CH RTN Mode Select Default device mode control before programming Using the remote control to operate your other devicesDevice code setup Mode Select Device mode control after programmingTo unlock the remote control’s volume keys Using the volume lock featureOperational feature reset To reset the remote controlSatellite receivers TVsCable boxes DVD playersVCRs KLHDBS/PVR Combos PVRsCable/PVR Combos Audio Amps/Tuners Audio AmpsCD players Icon Option Menu layout and navigationMain menu layout Installation Setup/Installation menu layoutSetup menu Picture Viewer Thinc menu layoutNavigating the menu system Selecting the menu language Setting up your TVTo configure the ANT 1 and ANT 2 input sources To select the menu languageChannel Program Programming channels automaticallyTo program channels automatically Manually adding and deleting channels in the channel memory To set the ColorStream HD audio mode Setting the time and dateSetting the ColorStream HD audio mode To set the time and dateViewing the CableCARD menu Setting the Hdmi audio modeTo set the Hdmi audio mode To view the CableCARD menuTo view the digital signal meter Viewing the digital signal meterTo set the Quick Restart feature To close the screen and return to the Terrestrial menuTo cancel the reset Reset Factory DefaultsTo close the screen and return to the Installation menu Viewing the system statusTo label the video input sources Using the TV’s featuresLabeling the video input sources Favorite Browser Tuning channelsTuning channels using Channel Browser Picture PreviewElements of the Channel Browser To set up the Channel BrowserTo tune to a channel or input in Browse mode To open the Channel BrowserAdding and clearing channels and inputs in the History List Tuning to the next programmed channelTuning to a specific channel programmed or unprogrammed To memorize a channel in the Rbutton Switching between two channels using Channel ReturnSwitching between two channels using SurfLock TheaterWide 1 picture size for 43 format programs Selecting the picture sizeNatural picture size TheaterWide 2 picture size for letter box programsFull picture size for 169 480i, 480p source programs only To set the scroll settingsTheater Settings To set the Cinema Mode to Video To turn on the auto aspect ratio featureTo turn off the auto aspect ratio feature Selected when Auto Aspect is OnTo display a program in the POP window Using the POP featuresUsing the POP double-window feature Press Pto open the POP double-windowSelecting the POP window audio out Using the Freeze featureTo use the Freeze feature POP double-window aspect ratioAdjusting the picture quality Adjusting the pictureSelecting the picture mode To select the picture modeTo view captions or text Using the closed caption modeClosed Caption Advanced To customize the closed captionsUsing the digital audio selector Adjusting the audioUsing the Closed Caption button on the remote control Digital closed captionsSelecting stereo/SAP broadcasts Adjusting the audio qualityTo adjust the audio quality To listen to stereo soundSelecting the optical audio output format Using the StableSound featureTurning off the built-in speakers If you cannot remember your PIN code Using the Locks menuEntering the PIN code Changing your PIN codeTo block and unblock TV programs and movies Press b to highlight Enable Rating BlockingBlocking TV programs and movies by rating V-Chip To download the additional rating system if availableTo unblock individual channels Blocking channelsTo block channels To block all channels at onceTo unblock all blocked channels at once Using the input lock featureUnlocking programs temporarily To temporarily unlock the programUsing the GameTimer Using the control panel lock featureSetting the sleep timer Setting the On/Off TimerUsing the PC settings feature To adjust the PC settingsUnderstanding the last mode memory feature Displaying TV status information using RecallUnderstanding the auto power off feature To display TV status informationUsing dynamic contrast Using the TV’s advanced featuresUsing the advanced picture settings features Using CableClear digital noise reductionTo select the color temperature Using Mpeg noise reductionSelecting the color temperature To select the Mpeg noise reduction levelTo select the lamp mode Selecting the lamp modeUsing the Vertical Edge Enhancer feature To turn on the Vertical Edge Enhancer featureTo adjust the Color Management settings Using the Color Management featureUsing the Game Mode feature To turn on Game ModeTo adjust the WOW settings Using the advanced audio settings featuresUsing the SRS WOW surround sound feature To turn on the Dolby Virtual/SRS TruSurround featureSetting up the network address Using the Thinc home network featureConnecting the TV to your home network Automatically setting up the network addressEither… Highlight OK and press T Manually setting up the network addressHighlight Basic Network Setup and press T Or… Highlight OK and press TBasic Network Setup menu appears Setting up file sharing on your PCResetting the network address Compatible operating systemsGo to section D, Setting up file sharing on the TV, on Permissions window for the selected folderProperties window Setting up file sharing on a PC with Microsoft WindowsProperties window for the selected folder Jpeg Picture Directory About the Software Upgrade featureHome Server Name Picture Viewer/JPEG file specifications Media specificationsFile/folder name specifications Audio Player/MP3 file specificationsAccessing Jpeg files stored on a networked PC Using the Picture ViewerNetworked PC specifications Maximum number of files per shared folderDuring the slide show To view your Jpeg files in Native Resolution modeViewing Jpeg files on the TV To set the slide show intervalPlaying MP3 files stored on a networked PC Using the Audio PlayerTo adjust or mute the volume To close the Audio PlayerSetting up e-mail scheduling Setting up e-mail schedulingRequired information and services Mail Scheduling ID Required Mail AuthorizationTest To exit the E-mail Scheduling Setup windowTest Passes message shown below will appear Setting up Smtp authentication To set up Smtp authenticationIncoming Mail Server and Outgoing Mail Server names or Code Description SolutionsTV’s E-mail Scheduling Setup Mail Authorization field Description of fields in the E-mail Scheduling Setup windowPassword field Mail Scheduling fieldSecurity settings Sending a request e-mail to the TV Using e-mail schedulingMail parameters To send a request e-mail to the TVFormatting a request e-mail Sample request e-mailsDelete request e-mail Receiving an e-mail from the TVModifying an existing recording or reminder Help request e-mailTroubleshooting General troubleshootingChannel tuning problems Sound problemsRemote control problems Closed caption problemsAudio Player problems Home network troubleshootingRecording problems Picture Viewer problemsMail scheduling problems Router, you must manually set up the network addressHome server setup problems See Setting the time and date on LED Indication Condition Solution Voice Announce LED indicationsAppendix Lamp unit replacement and careWhen to replace the lamp unit Replacing the lamp unit User-replaceable componentHow to replace the lamp unit Required toolsReplace the screw and tighten using a manual screwdriver Disposing of the used lamp unitSpecifications Limited United States Warranty For DLP Television ModelsLimited Canada Warranty How to Obtain Warranty ServicesHudson tjh@cryptosoft.com Index AccountMX196EN.book Page 92 Tuesday, June 27, 2006 143 PM MX196EN.book Page 93 Tuesday, June 27, 2006 143 PM MX196EN.book Page 94 Tuesday, June 27, 2006 143 PM MX196EN.book Page 95 Tuesday, June 27, 2006 143 PM Service Centers