Toshiba 65NH84 owner manual Connecting a cable converter box and VCR

Page 10

Connecting your TV

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TV’s features, select ANT-1.

To view premium channels or record with the VCR, select ANT-2, tune the TV and VCR to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

four coaxial cables

one set of standard A/V cables

From Cable

TV

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S- video cable (in the S-video jacks) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

OUT IN

 

 

 

IN

Cable converter box

 

 

 

 

IN from ANT OUT to TV

 

 

 

 

CH 3

 

 

OUT

 

 

 

 

 

CH 4

VIDEO

L

R

 

 

 

 

AUDIO

 

Stereo VCR

10

Image 10
Contents Projection Television Safety Precautions Dear CustomerImportant Safety Instructions InstallationService CareImportant Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Welcome to Toshiba Exploring your new TVConnecting an antenna or cable TV Connecting your TVConnecting a VCR Connecting a cable converter boxConnecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorderOne Hdmi cable type a connector Connecting an Hdmitm or a DVI device to the Hdmi inputOne pair of standard analog audio cables Connecting an audio system Preparing the remote control for use Installing the remote control batteriesUsing the Remote Control Remote Control functional key chartCBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Searching and sampling the code of a deviceConnecting YourTV Using the volume lock featureOperational feature reset Usingthe RemoteControl Setting up your TV FeaturesVCR setup codes Device code tableCD Player setup codes Learning about the remote control Connecting TVyour Learning about the menu systemPress y or z to highlight your desired language Changing the on-screen display languageSelecting the antenna input Display the pull-down menuProgramming channels automatically Introduction Connecting YourTVAdding channels to the TV’s memory To program channels automaticallyAdding and erasing channels manually Changing channelsUp TV Manually adjusting the color convergence Adjusting the color convergenceIntroduction Connecting your TV Setting up your TV Using the TV’s FeaturesTo reset your adjustments Switching between two channels using SurfLock Adjusting the channel settingsSwitching between two channels using Channel Return Programming your favorite channelsFavorite CH Press y or z to highlightPress Enter to display the Favorite CH menu UsingtheTV’s Features Appendix Introduction Connecting YourTV Usingthe RemoteControlSettingup yourTV Labeling channelsSelecting the picture size Natural picture sizeSetting your Usingthe RemoteControlUsingtheTV’s Features To raise the picture, press y Press Enter to display the Scroll Adjustment modeTo lower the picture, press z Press y or z to highlight Auto ASPECT, and then press Using the Auto Aspect featureSetting Your UsingtheTV’s Features Appendix Index EnterUsing the POP double-window feature POP Source Select I onSwitching the main and POP pictures Switching the speaker audio main or POPUsing the programmed channel search function Double-Window aspect ratioUsing the favorite channel search function About the auto favorite featureEntering the PIN code Using the Locks menuUsing the V-CHIP menu If you cannot remember your PIN codeTV Rating Independent rating system for broadcasters Enable BlockingOFF To release your setting Unlock Press z or y to select an itemMpaa Rating Independent rating system for movies Mpaa RatingUnlocking programs temporarily Usingthe RemoteControl Settingup YourTVLocking channels Repeat steps 2 and 3 for other channelsPress y or z to highlight Clear ALL, and then press Enter OFF Locking the video inputsChanging the PIN code Press Enter New PIN code is now activeSelecting the picture mode Adjusting the pictureAdjusting the picture quality Press x or to select the mode you prefer Selecting the color temperaturePicture Settings menu appears Saving your new preferencesUsing the CableClear DNR feature TheTV’s Features Resetting picture adjustmentsSelecting the display format for 480p signals only Selecting the cinema modeSelecting the video input source Press y or z to highlight Caption or TEXT, and then press Using the closed caption featureTo view text, highlight T1, T2, T3, or T4 Setting the on timer Setting the sleep timerPress Enter to start the clock To set the clockPress y or z to highlight Clock SET, and then press Enter To display the time on-screen Press RecallMuting the sound Adjusting the soundSelecting stereo/SAP broadcasts Press y or z to adjust the item, then press Enter Using the WOW surround sound featureAdjusting the sound quality Audio Settings menu appearsTo turn off the StableSound feature Select OFF in above Resetting your audio adjustmentsUsing the StableSound feature CenterSettingup YourTV UsingtheTV’s Features Appendix Index Connecting Your ControlUsing Remote Turning off the built-in speakersSelecting the background of the menu display Understanding the auto power off featureUnderstanding the last mode memory feature Displaying on-screen informationSpecifications AppendixBlack box appears on the screen TroubleshootingAntenna T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Page Page Index Manufactured by