Toshiba 65NH84 owner manual Adding channels to the TV’s memory, Programming channels automatically

Page 27

Adding channels to the TV’s memory

When you press Channel y or z, your TV will stop only on the channels stored in the TV’s channel memory.

Follow the steps below and on the next page to program all active channels into the TV’s memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and store them in its memory. After the channels are stored automatically, you can manually add or erase individual channels (see page 28).

To program channels automatically:

Note:

To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control.

Introduction

Connecting	yourTV

1.Press MENU, and then press x or • until the SET UP menu appears.

2.Press y or z until the TV/CABLE is highlighted, and then press ENTER to display the pull-down menu.

3.Press y or z to highlight either TV or CABLE, depending on which you use. If you use an antenna, highlight TV; if you use cable, highlight CABLE.

LANGUAGE	SET UP
LANGUAGE	TV
CLOCK SET	CABLE
ANT 1 / 2
TV / CABLE
CH PROGRAM
ADD / ERASE
: SELECT	ENTER : SET

4.Press ENTER.

5.Press z to select CH PROGRAM.

	SET UP
LANGUAGE		ENGLISH

CLOCK SET		0 0 : 0 0
ANT 1 / 2		ANT1
TV / CABLE		CABLE
CH PROGRAM
ADD / ERASE		ADD

: MOVE ENTER : START

6.Press ENTER to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message “Programming Now—Please Wait” appears.

7.When channel programming is complete,the message “Completed” appears.

8.Press Channel y or z to view the programmed channels.

POWER

TV

CABLE/SAT LIGHT SLEEP

VCR

DVD 1 2 3

AUDIO1

AUDIO2 4 5 6 MODE

			7			8	9
PIC SIZE			+10
			+10			0
ACTION			100/			0	ENT
MENU			O	FAV		ORI
		NF				ORI	T
		I				TE	T
							HE
E							LI	AT
E							LI		E
ID							N			R
U								K
G			LE	SUB	TIT
			LE	SUB
			TIT
	P					LE	A
	U						U
T			FAV				DI
SE			FAV				O
							O
			ENTER
			FAV
CH							VOL
			EXIT
DVD RTN			DVD CLEAR
DVD RTN
CH RTN			INPUT	RECALL			MUTE

SLOW/DIR SKIP/SEARCH

MENU

ENTER

yzx •

Channel yz

Usingthe	RemoteControl


Settingup	yourTV


UsingtheTV’s	Features


Appendix


Index

27

Image 27

Contents Projection Television Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Exploring your new TV Welcome to ToshibaConnecting your TV Connecting an antenna or cable TVConnecting a cable converter box Connecting a VCRConnecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting a camcorder Connecting two VCRsConnecting an Hdmitm or a DVI device to the Hdmi input One Hdmi cable type a connectorOne pair of standard analog audio cables Connecting an audio system Installing the remote control batteries Preparing the remote control for useRemote Control functional key chart Using the Remote ControlCBL/SAT Audio VCR TV/VCR TV/SAT Searching and sampling the code of a device Device code setupUsingthe RemoteControl Setting up your TV Features Using the volume lock featureOperational feature reset Connecting YourTVDevice code table VCR setup codesCD Player setup codes Learning about the remote control Learning about the menu system Connecting TVyourDisplay the pull-down menu Changing the on-screen display languageSelecting the antenna input Press y or z to highlight your desired languageTo program channels automatically Introduction Connecting YourTVAdding channels to the TV’s memory Programming channels automaticallyChanging channels Adding and erasing channels manuallyUp TV Setting up your TV Using the TV’s Features Adjusting the color convergenceIntroduction Connecting your TV Manually adjusting the color convergenceTo reset your adjustments Programming your favorite channels Adjusting the channel settingsSwitching between two channels using Channel Return Switching between two channels using SurfLockPress y or z to highlight Favorite CHPress Enter to display the Favorite CH menu Labeling channels Introduction Connecting YourTV Usingthe RemoteControlSettingup yourTV UsingtheTV’s Features AppendixNatural picture size Selecting the picture sizeUsingthe RemoteControl Setting yourUsingtheTV’s Features Press Enter to display the Scroll Adjustment mode To raise the picture, press yTo lower the picture, press z Enter Using the Auto Aspect featureSetting Your UsingtheTV’s Features Appendix Index Press y or z to highlight Auto ASPECT, and then pressPOP Source Select I on Using the POP double-window featureSwitching the speaker audio main or POP Switching the main and POP picturesDouble-Window aspect ratio Using the programmed channel search functionAbout the auto favorite feature Using the favorite channel search functionIf you cannot remember your PIN code Using the Locks menuUsing the V-CHIP menu Entering the PIN codePress z or y to select an item Enable BlockingOFF To release your setting Unlock TV Rating Independent rating system for broadcastersMpaa Rating Mpaa Rating Independent rating system for moviesRepeat steps 2 and 3 for other channels Usingthe RemoteControl Settingup YourTVLocking channels Unlocking programs temporarilyPress y or z to highlight Clear ALL, and then press Enter Press Enter New PIN code is now active Locking the video inputsChanging the PIN code OFFAdjusting the picture Selecting the picture modeAdjusting the picture quality Saving your new preferences Selecting the color temperaturePicture Settings menu appears Press x or to select the mode you preferUsing the CableClear DNR feature Selecting the cinema mode Resetting picture adjustmentsSelecting the display format for 480p signals only TheTV’s FeaturesSelecting the video input source Using the closed caption feature Press y or z to highlight Caption or TEXT, and then pressTo view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timerTo display the time on-screen Press Recall To set the clockPress y or z to highlight Clock SET, and then press Enter Press Enter to start the clockAdjusting the sound Muting the soundSelecting stereo/SAP broadcasts Audio Settings menu appears Using the WOW surround sound featureAdjusting the sound quality Press y or z to adjust the item, then press EnterCenter Resetting your audio adjustmentsUsing the StableSound feature To turn off the StableSound feature Select OFF in aboveTurning off the built-in speakers Connecting Your ControlUsing Remote Settingup YourTV UsingtheTV’s Features Appendix IndexDisplaying on-screen information Understanding the auto power off featureUnderstanding the last mode memory feature Selecting the background of the menu displayAppendix SpecificationsT2, T3, or T4. Turn closed captioning OFF TroubleshootingAntenna Black box appears on the screenLimited United States Warranty Limited Canada Warranty Page Page Index Manufactured by