Toshiba 65NH84 owner manual Connecting a VCR, Connecting a cable converter box

Page 9

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

two coaxial cables

one set of standard A/V cables

From Cable Box or Antenna

Stereo VCR

IN

IN from ANT OUT to TV

CH 3

 

 

OUT

 

 

 

CH 4

VIDEO

L

R

 

 

 

AUDIO

TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.

To watch basic cable and use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

• three coaxial cables

From Cable

TV

OUT IN

Cable converter box

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S- video cable (in the S-video jacks) instead of the standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note:

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

Introduction

 

 

 

 

 

Connecting

yourTV

 

 

 

 

Usingthe

RemoteControl

 

 

 

 

Settingup

yourTV

 

 

 

 

UsingtheTV’s

Features

 

 

 

 

Appendix

 

 

 

 

 

Index

 

 

 

9

Image 9
Contents Projection Television Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Exploring your new TV Welcome to ToshibaConnecting your TV Connecting an antenna or cable TVConnecting a cable converter box Connecting a VCRConnecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting a camcorder Connecting two VCRsConnecting an Hdmitm or a DVI device to the Hdmi input One Hdmi cable type a connectorOne pair of standard analog audio cables Connecting an audio system Installing the remote control batteries Preparing the remote control for useRemote Control functional key chart Using the Remote ControlCBL/SAT Audio VCR TV/VCR TV/SAT Searching and sampling the code of a device Device code setupOperational feature reset Using the volume lock featureConnecting YourTV Usingthe RemoteControl Setting up your TV FeaturesDevice code table VCR setup codesCD Player setup codes Learning about the remote control Learning about the menu system Connecting TVyourSelecting the antenna input Changing the on-screen display languagePress y or z to highlight your desired language Display the pull-down menuAdding channels to the TV’s memory Introduction Connecting YourTVProgramming channels automatically To program channels automaticallyChanging channels Adding and erasing channels manuallyUp TV Introduction Connecting your TV Adjusting the color convergenceManually adjusting the color convergence Setting up your TV Using the TV’s FeaturesTo reset your adjustments Switching between two channels using Channel Return Adjusting the channel settingsSwitching between two channels using SurfLock Programming your favorite channelsPress y or z to highlight Favorite CHPress Enter to display the Favorite CH menu Settingup yourTV Introduction Connecting YourTV Usingthe RemoteControlUsingtheTV’s Features Appendix Labeling channelsNatural picture size Selecting the picture sizeUsingthe RemoteControl Setting yourUsingtheTV’s Features Press Enter to display the Scroll Adjustment mode To raise the picture, press yTo lower the picture, press z Setting Your UsingtheTV’s Features Appendix Index Using the Auto Aspect featurePress y or z to highlight Auto ASPECT, and then press EnterPOP Source Select I on Using the POP double-window featureSwitching the speaker audio main or POP Switching the main and POP picturesDouble-Window aspect ratio Using the programmed channel search functionAbout the auto favorite feature Using the favorite channel search functionUsing the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN codeOFF To release your setting Unlock Enable BlockingTV Rating Independent rating system for broadcasters Press z or y to select an itemMpaa Rating Mpaa Rating Independent rating system for moviesLocking channels Usingthe RemoteControl Settingup YourTVUnlocking programs temporarily Repeat steps 2 and 3 for other channelsPress y or z to highlight Clear ALL, and then press Enter Changing the PIN code Locking the video inputsOFF Press Enter New PIN code is now activeAdjusting the picture Selecting the picture modeAdjusting the picture quality Picture Settings menu appears Selecting the color temperaturePress x or to select the mode you prefer Saving your new preferencesUsing the CableClear DNR feature Selecting the display format for 480p signals only Resetting picture adjustmentsTheTV’s Features Selecting the cinema modeSelecting the video input source Using the closed caption feature Press y or z to highlight Caption or TEXT, and then pressTo view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timerPress y or z to highlight Clock SET, and then press Enter To set the clockPress Enter to start the clock To display the time on-screen Press RecallAdjusting the sound Muting the soundSelecting stereo/SAP broadcasts Adjusting the sound quality Using the WOW surround sound featurePress y or z to adjust the item, then press Enter Audio Settings menu appearsUsing the StableSound feature Resetting your audio adjustmentsTo turn off the StableSound feature Select OFF in above CenterUsing Remote Connecting Your ControlSettingup YourTV UsingtheTV’s Features Appendix Index Turning off the built-in speakersUnderstanding the last mode memory feature Understanding the auto power off featureSelecting the background of the menu display Displaying on-screen informationAppendix SpecificationsAntenna TroubleshootingBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Page Page Index Manufactured by