Toshiba 46HM15 Selecting the lamp mode, To set the Cinema Mode to Film, To select the lamp mode

Chapter 8: Using the TV’s features

Selecting the cinema mode (480i signals only)

When you view a DVD (480i signal; 3:2 pulldown processed) from a DVD player connected to the VIDEO 1, VIDEO 2, ColorStream HD1/HD2 (component video), or HDMI inputs on the TV, smoother motion can be obtained by setting the Cinema Mode to Film.

To set the Cinema Mode to Film:

1.Press MENU and open the Video menu.

2.Highlight Theater Settings and press ENTER.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Navigate Select CH RTN Back EXIT Exit

3. In the Cinema Mode field, select Film.

Theater Settings

Picture Size			Natural
Picture Scroll		-1
Cinema Mode				Film
Auto Aspect Ratio					On
	Reset		Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

To set the Cinema Mode to Video:

Select Video in step 3 above.

Selecting the lamp mode

You can select either the High Bright or Low Power lamp mode.

•The High Bright mode is useful when additional picture brightness is desired (such as in a bright room).

•The Low Power mode reduces wear on the projection lamp. Using this mode should result in longer lamp life.

See “Lamp unit replacement” on page 103–105.

To select the lamp mode:

1.Press MENU and open the Video menu.

2.Highlight Advanced Picture Settings and press ENTER.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Navigate Select CH RTN Back EXIT Exit

3.In the Lamp Mode field, select High Bright or Low Power, whichever you prefer.

Advanced Picture Settings				ANT 1
	Dynamic Contrast		On
	MPEG Noise Reduction		Low
	CableClear		Auto
	Color Temperature		Cool
	Lamp Mode		Low Power
		Reset	Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Note:

If you set the lamp mode to Low Power, each time you turn on the TV, the lamp will start out in High Bright mode but will switch to Low Power mode in approximately 1 minute. You will notice a change in screen brightness when this happens. This is normal and is not a sign of malfunction.

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 75