Toshiba 46HM15, 62HM15A owner manual Using Mpeg noise reduction, Using dynamic contrast

Page 81

Chapter 8: Using the TV’s features

Adjusting the picture (continued)

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are High, Medium, Low and Off. Off is automatically selected when this feature is disabled (“grayed out”).

To select the MPEG noise reduction level:

1.Press MENU and open the Video menu.

2.Highlight Advanced Picture Settings and press ENTER.

3.Press z to highlight the MPEG Noise Reduction field, and then press x or • to make a selection.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Advanced Picture Settings					ANT 1
	Dynamic Contrast			On
	MPEG Noise Reduction			Low
	CableClear			Auto
	Color Temperature			Cool
	Lamp Mode			Low Power

		Reset		Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Using dynamic contrast

When dynamic contrast is set to “On,” the TV will detect changes in the picture quality that affect the appearance of your contrast settings and automatically adjust the video.

When dynamic contrast is set to “Off,” the settings selected in the Contrast field in Picture Settings will be used.

To select dynamic contrast preferences:

1.Press MENU and open the Video menu.

2.Highlight Advanced Picture Settings and press ENTER.

3.Press z to highlight the Dynamic Contrast field, and then press x or • to select either On or Off.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Advanced Picture Settings					ANT 1
	Dynamic Contrast			On
	MPEG Noise Reduction			Low
	CableClear			Auto
	Color Temperature			Cool
	Lamp Mode			Low Power

		Reset		Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Note:

If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then set the dynamic contrast to “On,” the picture mode automatically changes to Preference in the Picture Settings menu.

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	81

Image 81

Contents 46HM15 62HM15A Safety Precautions Disposal of mercury may be regulated due to46HM15 ST4605 62HM15A ST6214 Important Safety Instructions Installation, Care, and ServiceFor replacement of the obsolete outlet Contact a Toshiba Authorized Service Center Frequent or continuous, unplug the power cordNever attempt to service the TV yourself Service CenterContents Using the TV Guide On Screen 103110 Introduction Features of your new TVWelcome to Toshiba See Important notes about your DLP projection TV onIntroduction Connecting your TV TV front touchpad and side panel controls and connectionsGreen and Red LEDs 7 !¡ TV back panel connectionsTo a Personal Computer PC Overview of cable typesYou will need For more information, call your local cable operatorTo view encrypted digital channels TV back panelConnecting a camcorder Connecting a VCR and antenna or Cable TV no Cable boxTo view basic Cable channels and use the TV’s features Connecting a VCR and Cable boxOn Screen recording features To view basic and premium Cable channelsOne signal splitter Four coaxial cables Connecting a VCR and satellite receiverSelect the ColorStream HD-1 video input source on the TV From antennaTo view the DVD player To view premium Cable channelsTo view antenna or Cable channels Your TV has ColorStream component video inputsTo record a TV program while watching a DVD From antenna or CableSelect the ANT-1 video input source on the TV Connecting two VCRsTo view VCR To dub or edit from VCR 1 to VCROne Hdmi cable type a connector per Hdmi device Connecting an Hdmi or a DVI device to the Hdmi inputTo connect an Hdmi device, you will need To connect a DVI device, you will needConnecting a digital audio system Connecting an analog audio systemTo control the audio TheaterNet on-screen device control To connect the IR blaster cableTo control the devices Using analog-compatible IEEE1394 devices Connecting IEEE1394 video devicesSupported signals Using TheaterNet on-screen device controlIEEE1394 device initialization When you connect a D-VHS or Avhd device to the TVIEEE1394 device management To edit the IEEE1394 device informationHighlight the device you want to edit and press Enter To connect to the G-LINK terminal LINKconnectionSee Chapter Infrared SensorLearning about the remote control Using the remote controlPoint remote control Toward remote sensor On front of TV Remote control and the TVThere is no obstruction between Control directly at the TV and make sureInstalling the remote control batteries To install the remote control batteriesDevice mode control after programming Power Remote Control functional key chartAudio VCR Mute Searching and sampling the code of a device Device code setupNumbers CH y VOL yOperational feature reset Using the volume lock featureRepeatedly press Mode to select CABLE/SAT mode To reset the volume controls to the original device modeVCRs/PVRs Multi-brand remote control device codesCable boxes Brand CodeReceivers CD playersLaser disks DVD playersMain menu layout Menu layout and navigationButtons yzx on the remote Control or TV front panel to move Setup / Installation menu layoutNavigating the menu system You can use the buttons on the remoteTo set up the TV Guide On Screen system Setting up the TV Guide On Screen systemScreen 3 Do you have Cable service connected? Screen 1 Select the TV location USA, and then pressFor additional details, see Setting up the TV Guide On Screen system Turning off the TV Guide On Screen Automatic display feature Configuring the antenna input sources Setting up your TVTo configure the ANT 1 and ANT 2 input sources Selecting the menu languageProgramming channels automatically Programming channels into the TV’s channel memoryTo program channels automatically Channel Numbers Channel yz TV front touchpad Channel z / yManually adding and deleting channels in the channel memory To add and delete channels in the Favorite Channels sets Programming your favorite channelsTo clear your favorite channel ListsSetting up TheaterNet Setting up and using TheaterNet on-screen device controlTo set up TheaterNet device control TheaterNet Setup menu opensTo select the device’s control icons directly Using the TheaterNet control iconsTo close the on-screen control icons To view another sourceAmplifiers TheaterNet IR device codesLaser disk players Miscellaneous audio devicesVCRs Video accessory Hdtv decoder ReceiversTMK BrandSetting the Hdmi audio mode Setting the time and dateTo set the Hdmi audio mode To set the Avhd device skip timeTo set the Quick Restart feature Setting the Quick Restart FeatureViewing the CableCARD menu To view the CableCARD menuViewing the system status Viewing the digital signal meterTo open the TV Guide On Screen system TV Guide On Screen system includes the following featuresBelow Rating, stereo, HDTV, new episodeNavigating the TV Guide On Screen system TV Guide On Screen remote control functionsPanel Menus Video WindowSystem, the current program appears in the Video Window Lock/unlock icon indicates the status of the Video WindowTV Guide On Screen Icons Info Box¥ Show is presented in high-definition TV, if available Info Action Bar Small Info Box Large Info BoxListings screen TV Guide On Screen ServicesExample Category search Search screenTo edit or delete a keyword List of all matching shows for that keyword is displayedTo choose the way recordings are displayed Recordings screenTo view a recording, you can do one of the following Screen a Screen BRecord features Set a show to Record from a panel menuSchedule screen Recording notification banner Manually set a show to RecordRemind features Set a show Reminder from a panel menuManually set a show Reminder Reminder notification banner Setup screen Change system settingsChange channel display General defaults Change default optionsRecord defaults Remind defaultsSelecting the video input source to view Using the TV’s featuresTo select the video input source to view Channel zy TV front touchpadDTV Satellite/DSS Cable Game Console Labeling the video input sourcesTo label the video input sources To clear the input labelsUsing the Channel Browser Tuning channelsTo toggle between Browse mode and Select mode To tune to a channel in Browse modeTo set a channel as Home using the menus To set a channel as Home using the remote controlTo tune to the Home channel Adding channels to the channel historyTuning to the next programmed channel Tuning your favorite channelsSwitching between two channels using Channel Return Switching between two channels using SurfLockTo select the picture size Selecting the picture sizeNone of the picture is hidden Scrolling the TheaterWide picture onTheaterWide 1 picture size For 43 format program TheaterWide 2 picture size for letter box programsTo set the scroll settings Using the auto aspect ratio featureTo turn on the auto aspect ratio feature To turn off the auto aspect ratio featureTo set the Cinema Mode to Film Selecting the lamp modeTo set the Cinema Mode to Video To select the lamp modeUsing the POP double-window feature Using the POP featuresTo display a program in the POP window To close the POP window and tune to the highlighted windowPOP double-window aspect ratio Switching the speaker audio main or POPUsing the favorite channel scan feature Using the Freeze featureTo scan and tune your favorite channels Highlight the window for the channel you want to viewAdjusting the picture Selecting the picture modeAdjusting the picture quality Selecting the color temperature Using CableClear/DNR digital noise reductionTo select the color temperature To select CableClear/DNR preferencesUsing dynamic contrast Using Mpeg noise reductionTo select the Mpeg noise reduction level To select dynamic contrast preferencesAdvanced closed captions Using the closed caption modeTo view captions or text To customize the closed captionsDigital closed captions To select digital closed captionsPress Menu and open the Applications menu Using the digital audio selector Adjusting the audioMuting the sound Selecting stereo/SAP broadcastsAdjusting the audio quality Using the sub-bass system SBSUsing the StableSound feature Using the SRS WOW surround sound feature Turning off the built-in speakersSelecting the optical audio output format Memory card specifications Using the memory card Jpeg picture viewer/MP3 audio playerTo view digital photos on your TV Using the Jpeg picture viewerPress x to rotate the large picture 90 counterclockwise Press to rotate the large picture 90 clockwiseTo set the slide show interval Using the MP3 audio playerTo close the picture viewer To close the picture viewer and remove the memory cardVolume, and mute buttons, and then press Enter Memory card care and handlingTo close the MP3 audio player Setting the sleep timer Setting the On/Off TimerUnderstanding the last mode memory feature Understanding the auto power off featureUsing the gray level feature Displaying the Channel BannerEntering the PIN code Using the Locks menuIf you cannot remember your PIN code Changing your PIN codeTo block and unblock TV programs and movies Blocking TV programs and movies by rating V-ChipPress z to highlight Edit Rating Limits and press Enter Independent rating system for broadcastersBlocking channels Unlocking programs temporarilyLocking video inputs Using the front panel lock feature Using the GameTimerTroubleshooting Closed caption problems To SAP modeFeature V-Chip feature is available for the U.S. V-Chip system onlyLED indications Setup TV Guide On Screen FAQs101 102 When to replace the lamp unit Lamp unit replacement and careAppendix Replacing the lamp unitGrasp the lamp unit handle and gently pull the lamp unit How to replace the lamp unitCall Tacp Consumer Solutions at Disposing of the used lamp unitReplace the thumb screw and hand-tighten Edid = Enhanced-Extended Display Identification SpecificationsLimited One 1 Year Warranty on Parts and Labor Limited United States WarrantyLimited One 1 Year Warranty on Lamp Unit How to Obtain Warranty Service108 109 Index Channel programming87Ð90 Remote control Picture adjustmentsPicture-out-picture POP 2Ð5Toshiba America Consumer PRODUCTS, L.L.C

Related manuals

Manual 112 pages 25.63 Kb