Toshiba 46HM95 If your VCR did not stop playing the tape after testing, Watch TV, Appears

Chapter 5: TV Guide On Screen® setup

Setting up the TV Guide On Screen® system (continued)

Screen 20: If your VCR stopped playing the tape after testing,	Screen 23: This screen provides helpful information on using
select Yes and press ENTER. Screen 21 appears.	your TV Guide On Screen® system.

Did your VCR stop playing?

	If your VCR did not stop playing the tape after testing and		Press ENTER to exit the TV Guide On Screen® setup and
			watch TV.
	you want to test the same code again, select “ Test this code
	again” and press ENTER.
			TV Guide On Screen® Reminder
	If you want to test a different code, select No and press
			The TV Guide On Screen® system receives program listing
	ENTER. Screen 19 appears.
			data through your Cable or over-the-air video signal. In
	Note: Many VCRs require testing more than one code.
			order to receive regular program listing updates, remember
	Screen 21: Review the setup information displayed on your TV		to do the following:
			1. Leave the TV in standby mode when it is not in use by
	screen (an example is shown below).
			turning it OFF but leaving the power cord plugged in.
			2. If you have a Cable box connected, leave it ON.
			3. If you have a VCR connected, turn it OFF when not
			in use. (Do not unplug the power cord.) See page 13
			for VCR connection instructions.
			4. If you have more than one Cable system in your area,
			you may be prompted to select which Cable system’s
			program data to download. If so prompted, follow the
			on-screen instructions.
	If the information on your TV screen is correct for your		Note: If the TV power cord is unplugged for an extended period
	setup, select “Yes, end setup” and press ENTER. Screen 22		of time, it may take up to 24 hours with the TV in standby mode
	appears.		(power cord plugged in and power OFF) to download the TV Guide
	If the information is incorrect, select “No, repeat setup		On Screen® program schedule. It may take up to a week before an
			entire program schedule is available.
	process” and press ENTER. Screen 1 appears.
	Screen 22: Congratulations! You have successfully completed
			Turning off the TV Guide On Screen®
	TV Guide On Screen® system setup. Press ENTER to		automatic display feature
	display screen 23.
			After you set up the TV Guide On Screen® system, the
			program guide will display automatically (default setting)
			when you turn on the TV. To turn off the automatic
			program guide:
			1. Press TV GUIDE on the remote control to open the
			TV Guide On Screen® system (if it is not already open).
			2. Use the x • buttons to select the Setup menu.
			3. Use the yz buttons to select “Change Default
			Options,” and then press ENTER.
			3. Use the yz buttons to select “General Defaults,” and
			then press ENTER.
			5. Set the “Auto Guide” option to Off.
			6. Use the yz buttons to select Done, and then press
			ENTER.
	40
		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
HM95_R1_037-40_061505		40	6/24/05, 9:36 PM
	Black