Installing and Connecting the Projection TV
Connecting an AV Receiver
For greater control of all audio and video equipment, connect an AV receiver.
✍Change “Video Label” for the VIDEO 1 input to “Receiver” (see page 59).
Disconnect all power sources before making any connections.
1 Connect the coaxial cable from the incoming cable connection or antenna to IN on the VCR.
2 Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the projection TV.
3 Using a VIDEO cable, connect VIDEO of VIDEO 1 IN on the projection TV to MONITOR OUT on the AV receiver.
4 Using an AUDIO/VIDEO cable, connect TV OUT on the projection TV to AUDIO/VIDEO 2 IN on the AV receiver.
5 Using an AUDIO/VIDEO cable, connect the video equipment to the AV receiver.
6 Select the Setup menu and set “Video Label” to “Receiver” to fix your TV’s input to AV receiver (see “Video Label” on page 59).
Coaxial cable (not supplied) | ||
(not supplied) | ||
Rear of projection TV | ||
|
VCR
VIDEO | VIDEO | |
|
|
Cable/ Antenna
| |
AUDIO/ | AUDIO/ |
VIDEO 2 IN | |
| VIDEO 1 IN |
MONITOR
OUT
AV receiver | AUDIO/VIDEO 1 OUT |
|
30