The projection lamp has a limited life which illuminates the picture.
If the screen becomes dark, the color looks unusual, or the LAMP indicator on the front of the LCD projection TV flashes, it is time to replace the lamp with a new one (not supplied).
_ | _!!i;i !iiiiiii!] |
Electric appliancescan causefire or high temperature, resulting in injury or death. Be sure to follow the instructions below.
:Use a Sony
:Do not remove the lamp for any purpose other than replacement. Failure to do so may cause fire or a skin bum.
Before replacing the lamp, turn the power off on the main unit, then several minutes later, unplug the power cord. (The cooling fan will continue to blow for about two minutes after turning the power off.)
:Before replacing the lamp, let it cool down completely, as the surface of
the lamp remains extremely hot for at least 30 minutes after the power has been turned off.
Do not leave the removed lamp near flammable materials or within the reach of children.
:Do not pour water onto the removed lamp, or put any object inside the lamp. Doing so may cause the lamp to burst.
:Do not put flammable materials and metal objects inside the lamp receptacle of the LCD projection TV after removing the lamp. Doing so may cause fire or electrical shock. Also, be sure not to touch the receptacle, because it may cause a skin burn.
:Mount the new lamp securely, otherwise the screen may become dark, or it may cause a fire.
:Do not touch the glass with your fingers on the new lamp.
iii:i i,:i11
The used lamp contains Mercury, Dispose According to Local, State or Federal Laws.
4% Do not touch the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or lamp life.
/....
C')
.........i
(Continued)
13