Sony KFO60WE610, KFO42WE610, KFO50WE610 e ?%Y, Buttons for LCD Projection TV Operations

S!%e ?"%Y

Many TV features can be accessed directly through the remote control. The

following will explain the function of some of the buttons found on your remote control.

Buttons for LCD

Projection TV

Operations

Press to have the remote control operate the TV. The indicator lights up momentarily when pressed to show which equipment the remote control is operating.

Press to change between the VHF/UHF input and the AUX input.

Turn the LCD projection TV on and off. Ifa video input indication (e.g., VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO or CH +/- until a channel number appears.

Use for direct channel selection. Press 0-9 to select a channel (for example, to select channel 10, press 1 and 0). The channel will change after 2 seconds, or you can press ENT for immediate selection.

Press to scan through the channels (+ up or - down).

Press to adjust the volume (+ up or - down).

Press to alternate or jump back and forth between two channels. The LCD projection TV will jump between the current channel and the last channel selected.

Press to mute the sound. "MUTING" will appear on the screen. To restore the sound, press again or press VOL +.

This is useful when you need to copy down information that appears on the LCD projection TV's screen (see "Using the Freeze Function" on page 53).

46